High Quality Overhead Insulated Cable Covered Conductor

Description:
Covered conductors consist of stranded hard drawn aluminum conductors with either one, two or three extruded layers depending on the voltage rating. Covered conductors are available in black or gray depending on visual preference.

Benefits:
1. Covering prevents faults due to contact
2. Proprietary, high density outer layer resists abrasion and electrical tracking
3. High impulse strength allows for close spacing of phase conductors

Application:
Covered conductors are designed to be used in spacer cable systems. Conductors are suspended from the messenger using Hendrix polyethylene spacers. Covered conductors are rated for continuous operation at 75˚ C.

Specification:
(1) 5kV
A 0.085" black linear low density polyethylene or gray high density polyethylene

(2)15kV TP (For Treed Areas)
A 0.015" Semiconducting Polyethylene (0.020" for 477 kcmil and larger)
B 0.075" Natural Low Density Polyethylene (0.080" for 795 kcmil )
C 0.075" Black or Gray Track Resistant High Density Polyethylene (0.080" for 795 kcmil )

(3)15kV (For Non-Treed Areas)
A 0.075" Natural Low Density Polyethylene (0.080" for 795 kcmil )
B 0.075" Black or Gray Track Resistant High Density Polyethylene (0.080" for 795 kcmil )

(4)25kV
A 0.015" Semiconducting Polyethylene (0.020" for 477 kcmil and larger)
B 0.125" Natural Low Density Polyethylene
C 0.125" Black or Gray Track Resistant High Density Polyethylene

(5)35kV
A 0.015"Semiconducting Polyethylene (0.020" for 477 kcmil and larger)
B 0.175" Natural Low Density Polyethylene
C 0.125" Black or Gray Track Resistant High Density Polyethylene

(6)46kV
A 0.015"Semiconducting Polyethylene (0.020" for 477 kcmil and larger)
B 0.225" Natural Low Density Polyethylene
C 0.175" Black or Gray Track Resistant High Density Polyethylene