High Quality TUV Approved Solar PV Cable (1X25mm2) Manufacturer

Production Introduction

Solar PV cable is a kind of special cable used in solar power generation system. It is mainly applicable to DC voltage, derivate links of generating equipment, confluence connection between components and generating equipment system of DC1800V. It has climate resistance, cold resistance, high temperature resistance, friction resistance, UV and ozone resistance and other characteristics. The life service is at least 25 years.

Tinned copper conductor has superior conductive effect. High performance insulation and sheath after high energy electron accelerator radiation crosslinking plays an absolutely reliable insulating performance and mechanical performance.

This product is green, free halogen low smoke, low halogen low smoke product. In the event of fire accident, flame spread slowly, smoke concentration is low, high visibility, small amount of harmful gas release, easily evacuation for people, and have more time to deal with fire.

Production Specification

l Production name: photovoltaic cable
l Model: PV1-F
l Standard: 2 Pfg 1169/08.2007
l Conductor material: Tinned copper
l Insulation material: Low smoke zero halogen flame retardant radiation crosslinked polyolefine
l Sheath material: Low smoke zero halogen flame retardant radiation crosslinked polyolefine
l Nominal cross section: 6.0mm ²
l Ampacity: 70A
l Core Number: 1
l Conductor Structure: Mutiple-strand Tinned Copper
l Weight: 100kg/km
l Conductor diameter: 3.3mm
l Product diameter: 7.0±0.1mm
l Resistance(20ºC): ≤3.39Ω/km
l Test Voltage: 6.5KV/5min, no break down
l Environmental temperature: -40~90ºC
l The highest temperature of conductor: +120ºC
l Short circuit temperature: 5 seconds, 200ºC
l Service life: >25 years(-40~+90ºC)
l Rated voltage: 0.6/1kV(AC) 1.8kV(DC)
l Climate resistance: UV
l Flame retardant: single vertical burning(IEC60811-2-1)
l Sunlight resistance test: HD605/A1
l Ozone resistance test for finished cable: EN50396
l Smoke density: IEC61034,EN50268-2
l Halogen acid release quantity: IEC670754-1 EN50267-2-1

Executive Standard:
PV cable(solar cable) refers to original draft made out by PV system cable work team of German Standard Committee(Technical Specification 2PFG1169/08.2007 in Rhein TUV company German).

No-haogen PV-Cable Type:
PV1-F: Tinned Flexible Copper Wire No Halogen PO Insulation&Sheath Photovoltaic System Cable.

Application:
Applied to solar panels for power generation and related components of the wiring, connection,particularly suitable for outdoor . Resistance to sunlight, anti-aging , Using the low smoke halogen-free flame retardant materials, higher grade, more safety .

Solar Cable Information

Single Core Solar Cables Main type specification

Please note that we can make as your requirements

Double Core Solar Cables Main type specification

About Package

simple roll, plastic drum/reel, wooden pallet/box, cartons or customized as your requirement

About Asian Sun Group(Dayuan Cable)

1: Group with seven sub-companies

2: Factory about 200,081 square meters;

3: 800 staffs and 40 engineers, 11 production lines;

4: production capacity: 100,000m/day.

Our service
1) Inquiries are answered within 12 hours and OEM is welcome.

2) 11 production lines, experienced QC to control the quality of kinds of cables.

3) CCC Certificated, and can provide CE, RoHS and SGS certificates before exporting.

4) Grown from a small factory with annual turnover of $50,000,to over$50,000,000 during 10years.\

5) Ship your order immediately after contracted. We ship worldwide.

6) 800 staffs and 40 engineers, we a