High Voltage Composite/ Ceramic Housed Lightning Arrester 15kv
High Voltage Composite/ Ceramic Housed Lightning Arrester 15kv image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
Type | YH10W5-15/41.2 | 4/10µS High current impulse kA | 100 |
Rated voltage———kV | 15 | Lightning impulse withstand kV | 110 |
MCOV —————-kV | 12.7 | Power frequency voltage withstand(dry/wet)kV | 28 |
Nominal Current——-kA | 10 | 0.1S TOV————–kV | 18 |
Residual voltage of steep impulse—-at 5kA(kV) | 44.5 | 1S TOV—————-kV | 17.25 |
8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 41.2 | 10S TOV—————kV | 16.5 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 31.5 | 1200S TOV————-kV | 15 |
1mA D.C reference voltage (kV) | 21.2 | Creepage distance —-mm | 500 |
Line discharge level | 1 | Material employed in series non-linear resistor | Zinc Oxide |
2mS long duration impulse current A | 400 | Material of housing | silicone rubber |
Working condition:
Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | |||||||
48HZ<Rated frequency<62HZ | |||||||
Power frequency voltage should not be more than continuous running voltage | |||||||
Max wind speed should be less than 35m/s | |||||||
Earthquake intensity should be less than 7 degree | |||||||
If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China High Voltage Composite/ Ceramic Housed Lightning Arrester 15kv manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
200kv Metal Oxide Surge Diverters for Electric Station
Cheap Price Drop out Types of High Voltage Fuses
Hangzhou Electrical Resistance Znr Varistor
AC System 24kv Disconnect Switch for Power System
Innvoation Electrical Station Class Porcelain Surge Arrestors
Polymer Housed Transformer Protector Arrestor Lightning
Popular Lightning Arrester Products
6-35kv High Voltage Porcelain Wall Bushing
12kv High Quality Oxide Zinc Lightning Arrester for Substation
Compound Oxide Surge Arrester Yh5w-9L
Silicon Rubber Polymer Housing Metal Oxide Surge Arrester Without Gaps
24kv 33kv High Voltage Polymeric Lightning Arrester /Surge Arrester
Popular Surge Arrester Products
10ka Polymer Type Gapless Lightning Arrester / Surge Arrester Moa
Surge Protection Lightning Insulator Arrester
1mA D. C Reference Voltage 29.7kv Zinc-Oxide Lightening Arresters up to 500kv
48kv Composite Polymer Lightning Surge Arrester
High -Voltage Isolate Switch 15kv 1250A
(YH10W-66) Polymeric Housed Metal-Oxide Surge Arrester
Popular Surge Arresters Products
Silicone Housing Arrester Lightning for Over-Voltage Protection
Polymeric Housed Zinc Oxide Lightning Surge Arresters Series Surge Protector
Lightning Arrestor High Voltage Metal Oxide Station Surge Arrestor
Rated Voltage 110kv Mcov 86kv Porcelain Ceramic Housed Lightning Arrestor
Power Station Transformer Arrester/ Line Type Lightning Arrestors
Waterproof 30kv Composite Polymer Fall Lightning Surge Arrester
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters