IEC Armoured Gauge Copper Cable, Single or Multiple core

 Application: 

 This product is used for AC 35kV and below power distribution circuit,especially for the important places havin high requiremet for cables flame retardancy, like railway, tunnel,power station, petroleum, chemical industry and high building. 

Description:  

1. Conductor: copper or aluminum.

2. Both armored and non-armored type power cables are available.

3. Voltage rating: 0.6/1kV

4. Insulation: PVC

5. Outer sheath: PVC

6. Number of cable cores: one core (Single core),two core(Double cores),three cores,our cores(Fours equal-section-area cores and one smaller section area neutral core)7.Standards: IEC 60502.IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.

Characteristics of Cable

 1.Max Long-time operating temperature of PVC insulated cable is 70°C

 2.Installing temperature of cable should not be less than 0°C

 3.Max short-circuit temperature is:PVC not exceed 160°C, Not more than5 Sec.

 4.Permitting bending radius cable: Not less than 10 D times (D:external diameter of cable)

 5.Perfect chemical stability, resistant against acids, alkali, grease and organic solvents, and flamer retardant.
 

PVC power cable 

The PVC insulated power cable and fire resistant cable are suitable for fixed laying in power transmission and distribution lines with A.C.50HZ and voltage rating of up to or including 6KV.

1. Product Performance:

(1).The long-time permissible operation temperture of conductor shall not be higher than 70^oC.

(2).Conductor maximum short circuit(not more than 5 seconds)temperature shall not be higher than 160 ^oC.

(3).The power cable is not limited by drop in level when being laid,and the ambient temperature shall not be lower than 0 ^oC.

(4).Perfect chemical stability,resistant against acids,alkalis,grease and organic solvents,and flame.

(5).Light weight,perfect bending properties,installed and maintained easily and conveniently.

Voltage rating:0.6/1kV3.6/6kV.

Conductors:Copper or Aluminum.

Number of cable cores:one core(Single core),two cores(Double cores),three cores,four cores(Four Equal-section-area cores or three equal-section-area cores and one smaller section area neutral core),five cores(Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).We provide armoured trpe and non-armored type for the power cables above.

Our company has been carrying out Chinese national standard GB 12706 and GB 12666.6(equivalent to IEC 60502 and IEC 60331)for PVC insulated power cable and fire resistant cable needed by domestic customer,and for foreign customers we can manufacture in accordance with BS,DIN and other countries,standards.In addition,we can design and manufacture PVC insulated power cable with special characteristics according to needs of customers.

2. Technical Requirements

(1).Description

The products

The factory and equipments

The canton fair and certification

always for your best services

Contact person : Ricky Zhao

Tel: 86-371-67679195

Mob: 86-158 3806 2790

Website : jsgroup.en.