K Type T Type IEC High Voltage 33kv Dropout Fuse Link

K Type T Type IEC High Voltage 33kv Dropout Fuse Link image

Get Latest Price Request a quote

Quick Details

Product Name:

K Type T Type IEC High Voltage 33kv Dropout Fuse Link

Standard:

IEC IEEE

Fusing Device:

Fuse Link

Fusing Speed:

T K

Shape:

Circle

Usage:

High Voltage

Type:

Distribution

Breaking Capacity:

High

Long:

533,660,787

Head:

Removeable ,Fixed

Trademark:

OEI Power

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

85389000

Product Details

"K" and "T" type fuse link, according to IEC-282 standard. They are suitable for drop out fuse cut out with rated voltage

HIGH VOLTAGE EXPULSION TYPE FUSE LINKS

TABLE OF CONTENTS

ITEM
TITLE PAGE

PART 1 GENERAL

1.01 SCOPE E13 1

1.02 STANDARDS                                          E13 1

1.03 SERVICE CONDITIONS                              E13 2

1.04 SYSTEM CONDITIONS E13 2

1.05 TESTING E13 2

1.06 SPARES E13 3

1.07 PACKING AND SHIPMENT E13 3

1.08 SUBMITTALS E13 3

PART 2 PRODUCTS

2.01 DESIGN E13 4

A. Standardization of Fuse Links E13 4
B. Rating of Fuse Links E13 4
C. Characteristics of Fuse Links E13 4

2.02 MATERIALS E13 4

A. Current Carrying Parts of Fuse Links E13 4
B. Fuse Link Button E13 5
C. Length of Fuse Links E13 5
D. Pull on Fuse Links E13 5
E. Identification E13 5

TECHNICAL DATA SCHEDULE E13 6

PART 1 GENERAL

1.01      SCOPE

This Specification covers the design, manufacturing, testing, supply, delivery and performance requirements of HV Expulsion Type Fuse Links for use by the Electricity Company of Ghana Limited.

1.02    STANDARDS

The fuse links shall comply with the latest editions of and amendments to, the standards/specifications listed below:

IEC                                                  – International Electrotechnical Commission

IEC 60282                                –     High Voltage Fuses Part 2: Expulsion and similar fuses

ANSI American National Standards Institute

IEEE C37.41                            –     Design for High Voltage Fuses, Distribution Enclosed Single Pole Air Switches. Fuse Disconnecting Switches and Accessories.

ANSI C37.42                            –     American National Standard Specifications for Distribution Cutouts and Fuse Links.

NEMA National Electrical Manufacturers Association

NEMA SG2                              –     High Voltage Fuses

1.03    SERVICE CONDITIONS

As in Specification H0C

1.04    SYSTEM CONDITIONS

As in Specification H0C

1.05    TESTING

Type Tests

A.       The Supplier shall confirm on the attached schedule that the following tests have been performed according to ANSI C37.42.

1.        Melting Current Tests; Table 6

2.        Temperature Rise Tests

3.        Time/Current Characteristic Tests

B.       Type/Design Tests may (at the Purchaser’s discretion) be dispensed with if the Supplier/Contractor furnishes evidence to the Purchaser’s satisfaction that the relevant tests have already been performed on identical equipment. In this case the Supplier shall provide documentary proof in the form of Certified Test Certificates that the assembled equipment and its component parts been successfully typetested by an independent testing authority in accordance with the relevant clauses of referenced Standards. Test Certificates as evidence of successful completion of type tests shall be submitted as part of the Bid.

C.       Inspection

The Purchaser reserves the right to witness the manufacturing process, any type tests specifically performed on the materials to be supplied to Customer and any routine tests required in the manufacture and supply of such equipment. The Supplier shall provide free access to the Purchaser to any site where such manufacturing process, or tests, either type or routine tests are taking place. The Supplier shall bear the in plant costs of such witness. The Supplier shall provide the Purchaser of a schedule of manufacture and tests at least two weeks before the events are to occur.

1.06    SPARES

(NOT APPLICABLE)

1.07    PACKING AND SHIPMENT

As in Specification H0C


1.08    SUBMITTALS

As in Specification H0C

PART 2          PRODUCTS

2.01    DESIGN

A.       Standardization of Fuse Links (Mechanical/Interchangeable).

High voltage expulsion fuses shall be suitable for use on the Expulsion fusegears described in the associated specifications H16 and H34.

B.       Rating of Fuse Links

The preferred rating of fuse links shall be 3A, 5A, 8A, 16A, 25A, 40A, 63A and 100A at 11kV and 1A, 2A, 3A, 5A, 8A, 16A, 20A and 31.5A at 33kV. The rated current of the fuse link is the maximum current which it will carry continuously without deterioration and undue heating. Supplier shall state on the attached schedule the maximum temperature in ^oC attained by the fuse link after continuous operation at maximum rating.

C.       Performance Characteristics of Fuse Links

1.        The fuse links are required to give protection against short circuits. They shall be so rated and shall have such blowing characteristics as to be suitable for selective operations with the fuse links at present in use on the system namely Type K i.e. fast, fuse links to NEMA SG2 and ANSI C37.42 1981.

2.        The Supplier shall present to the Purchaser timecurrent characteristics of all the distribution fuselinks on offer. The performance characteristics of the fuselinks shall include:

(a)       Meltingtimecurrent characteristics
(b)       Total clearingtimecurrent

The timecurrent characteristics shall be presented as curves.

The Supplier shall state the minimum and maximum melting currents required to melt the fuse links at the three appropriate time points used in Table 6 {meltingcurrents for TypeK (fast) fuse links) of ANSI C37.42 1981

2.02      MATERIALS

A.       Current carrying Parts of Fuse Links

All current carrying parts of the fuse links shall be nonferrous material; the main requirements being resistance to atmospheric corrosion. Tin is not acceptable as a possible element.

Supplier shall state composition of:

1.        Fuse Element

2.        Fuse Link

B.       Fuse Link Button

The diameter of the button head cap on fuse links shall be 19.1mm. Removable type button heads are preferred for use with 11kV fusegear.

C.       Length of Fuse Links

The minimum overall length of fuse links rated 1 to 100 amperes shall be:

:          510mm for 11kV units per ANSI C.37.42

:          762mm for 33kV units per ANSI C.37.42

D.       Pull on Fuse Links (Tensile Withstand Strength)

The expulsion fusegear shall operate satisfactorily while exerting a pull of 44.5N on the fuse link per ANSI C.37.42, 3.2.3.4 1981.

E.        Identification

Each fuse link must have stamped on it:

1.        Manufacturers name or identifying mark

2.        Continuous current rating

3.        Type designation, K or T

We are China K Type T Type IEC High Voltage 33kv Dropout Fuse Link manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote