Line Discharge Level 2 Substation Outdoor Ceramic Housing Arresters
Line Discharge Level 2 Substation Outdoor Ceramic Housing Arresters image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
| Type: |
Y5W5-108/259 |
||
| Rated voltage———kV | 108 | 4/10µS High current impulse kA | 100 |
| MCOV —————-kV | 86 | Lightning impulse withstand kV | 550 |
| Nominal Current——-kA | 5 | Power frequency voltage withstand(dry/wet)kV | 230 |
| Residual voltage of steep impulse—-at 5kA(kV) | 339 | 0.1S TOV————–kV | 129.6 |
| 8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 281 | 1S TOV—————-kV | 124.2 |
| Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 220 | 10S TOV—————kV | 118.8 |
| 1mA D.C reference voltage (kV) | 157 | 1200S TOV————-kV | 108 |
| Line discharge level | 2 | Creepage distance —-mm | 3906 |
| 2mS long duration impulse current A | 600 | Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
| Environment temperature: -40–+40 degree | |||||||
| altitude:<1000m | |||||||
| 48HZ<Rated frequency<62HZ | |||||||
| Power frequency voltage should not be more than continuous running voltage | |||||||
| Max wind speed should be less than 35m/s | |||||||
| Earthquake intensity should be less than 7 degree | |||||||
| If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China Line Discharge Level 2 Substation Outdoor Ceramic Housing Arresters manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
Pin Insulator Silicon Rubber Insulator
High Power Metal Oxide Varistor for Lightning Arresters
ZnO Block/ Zinc Oxide Resistor for Mv Lightning Arresters
Transmission Line Medium Voltage Compostie Insulator
AC System Ceramic Porcelain Gapless Metal-Oxide Lightning Surge Arrester
35kv Porcelain Housed Gapless Metal Oxidelightning Arrester (Y5WZ5-51/134)
Popular Lightning Arrester Products
27kv Polymer Lightning Arrester (Silicone Rubber)
90kv Metal Oxide Lightning Arrester for Overvoltage Protection
Yh10W-36, Sharp Head 36kv 10ka Surge Arrester
24kv High Voltage Lightning Polymer Surge Arresters (IEC Standard)
30kv Silicon Type Surge Arrester Cmr5w-30
Protection Over Voltage 12kv 10ka Metal Oxide Polymer Lighting Arrester
Popular Surge Arrester Products
Polymer Fuse Cutout, Drop out Fuses 15 Kv 100A 001
Factory Price Current Ceramic ZnO Metal Oxide Gapless Surge Arrester
110kv 10ka Polymeric Zinc Oxide Lightning Arrester Manufacturers
Ruitian Zinc Oxide Arrester 11kv Porcelain Surge Arrester
Yh10W-216.216kv 10ka Surge Arrester 01
Popular Surge Arresters Products
10ka 12kv Silicon Rubber Housed Metal Oxide Gapless Surge Arrester
0.25~500kv 10ka Hv Polymeric Zinc Oxide Surge Arrestor with Kema
24kv 10ka Polymer Housed Surge Arrester
33kv/10ka Polymeric Housed Zinc Oxide Surge Arrester
High Voltage ZnO Types of Lightning Arrester Cap
10kv Composite Surge Protector Lightning Arrester
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters
