Load Break Fuse 15kv
Load Break Fuse 15kv image
Get Latest Price Request a quote
Quick Details
Product Details
CUT-OUT
Gama 20 kV a 36 kV
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
We are China Load Break Fuse 15kv manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Cut out Products
Circnlay Circuit Cabinet Top and Bottorm of Fuse and Fitting
Polymer Fuse Cutout, Drop out Fuses 36 Kv 100A
Line Tap Connector Split Bolt 100mm ² (MO-5/8)
Popular Fuse Products
33kv-36kv Pd2 Series Export Drop-out Electrical Fuse Cutout with Silicone
Price Overhead Power Line 11kv Dropout Fuse Cutout
33kv Fuse Cutout, Fuse, Protectors
High Voltage Dropout Fuse or Fuse Cutout (Vc-15) , Silicon Fuse Cutout, Fuse Cutout, Fuse
High Voltage Dropout Fuse or Silicon Fuse Cutout (Vc-7) , Fuse Cutout
Apdm400 Type LV Fuse Switch with Nh Type Fuse Link
Popular Interrupter Products
Stay Rod Assembly M16 Conventional
Fuse Cutout, Drop out Fuses 15kv
12kv, 24kv & 36kv Fuse Cutouts Porcelain
Switch Disconnector Fuse Holder, 18 Kv - 200 AMP, Without Arc Chute
Best Price24kv 100A Ceramic Types Drop out Fuses Cutout/Cut out Fuse
Popular jgtrade1 Products
IEC Standard Fuse Expulsion Dropout ISO9001 and ISO14001 Manufacturer 11kv 24kv 33kv
Yh10W-216.216kv 10ka Surge Arrester 01
Tags: Cut out, Fuse, Interrupter, jgtrade1