Low Voltage 4X240 Cu/XLPE/PVC Cable Copper 240 mm2 Power Cable

DESCRIPTION

CONSTRUCTION

1. Conductor: Plain Annealed Copper, Class 2 Stranded Circular, Compacted or Sectored
2. Insulation: Cross-linked Polyethylene (XLPE)  Compound
   • Insulation Color :
     • 4 Cores: Brown,  Black, Grey,Blue or Red, Yellow, Blue, Black
   • Assembly :
     • Cores cabled together with filler and covered with Polyester (PET) Tape
3. Outer Sheath: PVC/PE Compound
   • Outer Sheath Color : Black

ELECTRICAL CHARACTERISTICS

• Operating Voltage, Uo/U :   0.6/1KV
• Operating Temperature : -15’C to 90’C
• Final Short Circuit Temperature : 250′ C
• Test Voltage : 3.5kV for 5 minutes
• Current Carrying Capacity
  1.  Clipped Direct (Ref Method C)
     • One 3 or 4-Core Cable, 3-Phase A.C : 73A
  2. In free air or on a perforated cable tray etc,  horizontal or vertical (Ref method E)
     • One 3 or 4-Core Cable, 3-Phase A.C : 78A
  3. Direct in Ground or in ducting in ground, in or around building (Ref method D)
     • One 3 or 4-Core Cable, 3-Phase A.C : 58A

REFERENCE STANDARD

• Design Specification: IEC60502-1
• Conductor: IEC60228, BS EN60228
• Flame Retardancy: IEC60332-1, BS EN60332-1

INSTALLATION REFERENCE

• Minimum Bending Radius(mm): 8 x cable overall diameter
• Max. Pulling Tension (N/mm2) : 70

Product parameters

HR PVC:
Heat resisting PVC compound has good thermal stability at an accelerated process temperature. The rate of degradation of HRPVC compound with time under the influence of temperature is less. It has high thermal stability can withstand high continuous temperature which is an indication of performance of the cable at normal and elevated temperature in actual usage.
The cables with HR PVC compound can work continuously at an operating temperature of 85 Deg. C. The usage of HR insulated cables is recommended in humid atmosphere and at  places with constant high temperature than normal temperature. The current rating of the HR insulated cables is higher than the general PVC insulated cables.

FRLS Compound:
Fire Accidents in cable galleries and other vulnerable areas like power plants and industrial complexes and in public places like theatres, hotels and airports, etc. have demonstrated the need for reliable electrical installation, resistant to fire and ability to operate during a fire without propagating it. The use of correct electrical installation makes evaluation of buildings easier, minimizes the element of panic and enables the emergency services do their job efficiently, significantly aiding damage control operations and reducing loss of life and property.
Electric Cables supplying these circuits must be manufactured and tested for certain standards and specifications concerning their behaviour in fire. Flame Retardant Low Smoke (FRLS) cables, which are manufactured using specially developed FRLS compound for sheathing, are resistant to ignition and flame propagation, and reduce smoke emission and release of acid fumes.

XLPE COMPOUND:
XLPE means cross linked polyethylene or vulcanised polyethylene. The basic material of XLPE is low density polyethylene. Polyethylene is a thermoplastic material consisting of long chain Hydrocarbon Molecules at elevated temperature and these molecules tend to move relative to one another so that the material becomes increasingly diformable and will eventually melt at a temperature of around 110 Deg. C. By means of process similar to the Vulcanisation of Rubber the PE Molecules can be cross linked. The process of cross linking or vulcanisation consists of producing chemical bonds at intervals between the long molecular chain to give a "Ladder" effect which prevents slippage between molecules. As a result of Crosslinking, the material becomes heat resistance and does not soften at higher temperature. Further it has better resistance to stress cracking and good resistance to ageing in hot air with the change in structure. There is no adverse effect on electrical properties. XLPE Cables are excellent in electrical, thermal, mechanical and chemical properties.

*Further information about rating factor for certain cable arrangement can be found on supplementary technical information.

Application
Power cable : Indoors, cable trunking, outdoors and burried in the ground, for power stations, industry and switchgear as well as for urban supply networks, if mechanical damage is unlikely.

Special Features on Request :
• Tinned Coated Copper Conductor
• Fire Resistance
• Oil Resistance
• UV Resistance
• Flame Retardant Cat. A, B, C
• Flame Retardant Non Category
• Heat Resistance
• Anti Termite
• Anti Rodent
• Low Smoke Zero Halogen
• Nylon Coated
 

Note :
Conductor Shape
1.5 – 10 sqmm supplied in solid (re) or non compacted circular stranded (rm) 
16 sqmm supplied in non compacted circular stranded (rm) conductor shape
25 – 800 sqmm supplied in non compacted circular stranded (rm) or compacted circular stranded (cm) conductor shape

Tinned Coated Copper Conductor
Electrical properties for tinned coated copper conductor will be submitted upon request

Standard Packing
1.5 – 10 sqmm supplied in coil @ 100 m
16 – 300 sqmm supplied in wooden drum @ 1000 m
400 – 800 sqmm supplied in wooden drum on available length
Length Tolerance per drum ± 2%

Any problem and inquiry pls contact with Vivian Yuan
Phone number: +86-15838290725