Low Voltage Draw out Switchgear
Low Voltage Draw out Switchgear image
Get Latest Price Request a quote
Basic Info.
Product Description
Cpmposites insulator,All nsulators are manufactured in accordance
to IEC 61952. Quality processes are implemented
as per ISO 9001:2000.
Item description | 11 kV Silicone composite Pin insulator requirements |
Type | Silicone composed pin insulator complete with spindle, nut and washer |
Nominal Voltage (kV) | 11 |
Highest System Voltage (kV) | 12 |
Min Nominal Creepage Distance ( mm ) |
280 |
Min failing load (kN)-Mechanical test |
10 |
Power frequency withstand voltage (one minute) Wet (kV r.m.s) |
28 |
Lightning impulse withstand voltage (kV) peak |
95 |
Material of insulation | High Temperature Vulcanised silicone rubber |
Spindle diameter (mm) | 20 mm |
Previous Type Test Certificate/results/report including ageing test at 5000 hours as per IEC 61109 |
To be submitted together with the bid. |
Routine test results | Tenderer shall provide routine test certificate with delivery of insulators |
Drawings with dimensions | Tenderer shall provide drawings showing the dimensions and tolerances of Insulators offered |
Applicable Standards for insulation and end fittings |
BS 3288 – 2 1997, IEC 61109 |
Altitude above sea level | 1400m |
Operating ambient temperature | -1 to 40 oC |
Relative humidity (Maximum) | 85% |
log embossed /printed on the insulator |
Yes |
S/N |
Detail |
Unit |
Data |
1. | Description |
33kV silicon composite pin insulator for mounting on steel cross arms as per drawing ZAM-GEN-87-E-12904 below |
|
2. | Type |
Silicon composite pin insulators complete with spindle, washer, nut and lock nut |
|
3. | Rated voltage |
kV |
33 |
4. | Highest system voltge |
kV |
36 |
ITE M | Technical Description | Unit | 11kV Silicon Rubber Line Post Insulator with bottom metal fittings complete with spindle for Horizontal Mounting. |
1 | Nominal voltage | kV | 11 |
2 | Highest system voltage | kV | 12 |
3 | Nominal specific Creepage Distance | mm/kV | 25 |
4 | Spindle dimensions | mm | As per figure 1.1 attached |
5 | Insulator dimensions | mm | As per figure 1.0 attached |
6 | Failing load (bend) P0 | kN | 10 |
7 | Failing load (Torsion) | Nm | 1.2 |
8 | Power frequency wet withstand voltage | kV(r.m .s) – one minute |
28 |
9 | Lightning impulse withstand voltage (peak) | kV | 95 |
10 | Max Nominal Diameter of Insulating Part | mm | 210 |
11 | Material of insulating part | High Temperature Vulcanised Silicon rubber |
|
12 | Material of metal parts | Hot dip galvanised steel | |
13 | Applicable Standards | BS 137 IEC 61109 ,IEC61952 ,IEC60815-3 |
|
14 | Altitude above sea level (m) | 1400 | |
15 | Operating ambient temperature (oC) | -1 to 40 | |
16 | Relative humidity (%) | 85 | |
17 | Type test certificates and results to be provided with bid | Yes/No | Yes |
18 | Routine test results/certificates to be provided on delivery | Yes/No | Yes |
19 | Drawings showing dimensions of insulators offered to be provided with bid |
Yes/No | Yes |
20 | log embossed /printed on the insulator |
Yes/N o |
Yes 173 |
Item description | 11 kV Silicone composite Pin insulator requirements |
Type | Silicone composed pin insulator complete with spindle, nut and washer |
Nominal Voltage (kV) | 11 |
Highest System Voltage (kV) | 12 |
Min Nominal Creepage Distance ( mm ) |
280 |
Min failing load (kN)-Mechanical test |
10 |
Power frequency withstand voltage (one minute) Wet (kV r.m.s) |
28 |
Lightning impulse withstand voltage (kV) peak |
95 |
Material of insulation | High Temperature Vulcanised silicone rubber |
Spindle diameter (mm) | 20 mm |
Previous Type Test Certificate/results/report including ageing test at 5000 hours as per IEC 61109 |
To be submitted together with the bid. |
Routine test results | Tenderer shall provide routine test certificate with delivery of insulators |
Drawings with dimensions | Tenderer shall provide drawings showing the dimensions and tolerances of Insulators offered |
Applicable Standards for insulation and end fittings |
BS 3288 – 2 1997, IEC 61109 |
Altitude above sea level | 1400m |
Operating ambient temperature | -1 to 40 oC |
Relative humidity (Maximum) | 85% |
log embossed /printed on the insulator |
Yes |
We are China Low Voltage Draw out Switchgear manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Composite Insulator Products
Line Post Composite Insulator for High Voltage Overhead Transmission Line
Fxbw4-110/100 Polymer Suspension Insulator/ Long Rod Composite Insulator
35kv Composite Station Post Insulators
15kv 70kn Polymer Composite Suspension Insulator for High Voltage Line
Composite Insulator (FXB-66/70) for Power Transmission
Polymer Insulator Surge Arrester
Popular jgtrade1 Products
Yh10W-192, 192kv 10ka Surge Arrester
High and Low Voltage Electroscope
High Strength Bimetal Clamp Cu-Al 6-50 25-150 mm2
Switch Disconnector Fuse Holder, 18 Kv - 200 AMP, Without Arc Chute
Popular Polymer Insulator Products
Solid Insulated Ring Network Switchgear
C4-450-2300 for Transmission and Substation Station Post Insulator
W, Ws Type Round Head Hung Plates
11kv Porcelain Station Post Insulator
Popular Silicone Rubber Insulator Products
Pin Type Line Porcelain Insulator
110kv Polymer Suspension Insulator/High Quality Long Rod Composite Insulator
Isoladores De Porcelana Polymer Insulator
Isolating Stem Porcelain 13.2kv Type, Thread 1 ", ANSI 55-4.
Tags: Composite Insulator, jgtrade1, Polymer Insulator, Silicone Rubber Insulator