Low Voltage XLPE Electric Cable

Standard

The product is manufactured according to the standard of GB12706 or IEC, BS, DIN and ICEA upon request.

Applications

The product is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/kV-26/35kV

Operating characteristics

1, Rated power-frequency voltage Uo/U: 0.6/1/kV-26/35kV

2, Max. Permissible continuous operating temperature of conductor: 90

3, Max. Short-circuit temperature of conductor shall not exceed 250. (5s maximum duration ).

4, The ambient temperature under installation should not below 0

5, The bending radius of a single-core cable should not less than 20 times of the cable diameter. The bending radius of a three-core cable should not less than 15 times of the cable diameter.

Construction

Conductor: Annealed Copper or Aluminum Class1, Class2

Insulation: Extruded XLPE(Cross Linked Polyethylene)

Bedding: PP Tape, PVC

Armoured: Galvanized Steel Wire(SWA) or Steel Tape(STA)

Sheathed: PVC or PE

No. Of Cores: 1~5

Rated voltage: 0.6/1kv~26/35kv

Nominal cross sectional area of conductor: 1.5~400mm2

Workshop:

 
Shipment:

 
Customer:

 
Certification:

 
FAQ:
1. How many years has Henan Jiapu Cable Group been in production?
Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China

2. What kinds of products does Jiapu Cable manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;

3. What kind of certifications do you have?
SABS, CE, ISO9001-2000, SGS

4.Which markets do you involve mainly in?
Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.

5. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.

6. What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.

7. What is the production capacity per week or per month ?
For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables. 

8. Do you supply the customers with installation service in foreign country ?
We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.