M16 X 200 Bolt & Nut
M16 X 200 Bolt & Nut image
Get Latest Price Request a quote
Quick Details
Product Details
Product | D Bracket | ||||||
Test Items | Test Content | Test Result | |||||
Sample 1 |
Sample 2 |
Sample 3 |
Sample 4 |
Sample 5 |
Remarks | ||
Visual Inspection | Crack | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×" Test Conclusion: |
Stoma Trachoma | √ | √ | √ | √ | √ | ||
Fins | √ | √ | √ | √ | √ | ||
Burr | √ | √ | √ | √ | √ | ||
Galvanizing thickness | μm | √ | √ | √ | √ | √ | 1) Passed Mark"√" 2) Not Passed Mark"×": Test Conclusion: |
Mechanical Characteristics | Mechanical Load | √ | √ | √ | √ | √ | 1)Passed Mark"√" 2)Not Passed Mark"×" Test Conclusion: |
Inspector | Date: 02. March,2011 Approved: |
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Material grade 300w steel to SANS 143
Finish: hot dip galvanized
With cut threads(cut before galvanizing)
Supplied complete with on Hex nut and one round flat washer
Thread pitch. 2.0(before galvanizing)
Washer outside diameter: 29.2-30.0mm bolt Hole 18.0-18 5mm, thickness:2.4-3.6mm
Materials Speciification:SANS 1431
Corrossion Specification:ISO1461
We are China M16 X 200 Bolt & Nut manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Bolt Products
All Kinds ANSI Standard Galvanized Machine Bolt with Square Nut
Galvanized Wood Pole Pig Tail Bolt with Nut
High Strength Suspension Clamps
Hot DIP Galvanized Stainless Steel Bolt Eye Long
Hot Selling Pole Line Hardware Galvanized Steel Bolt
M6-M36 Steel Screw Bolt 8.8 Grade Hex Nuts and Bolts
Popular Bolts and Nuts Products
Strain Clamps for Insulated Cable
Terminal Connectors Bolted Type, Type SL, Group a
Terminal Connectors Type Sy, Compression Type, Group B
Popular jgtrade1 Products
33-1000kv Substation Equipment
10PCS Brushes Set 2*15mm 2*25mm 2*35mm 2*50mm 2*60mm
Strain Clamps Clevis Pistol (GUN) ACSR 50mm2 Complete with 3 U-Bolts
Circuit Breaker Disconnect Switch Isolator Single-Pole 600A
Popular Screw Products
Factory Direct Selling Pig Tail Eye Screw Pigtail Clamp for FTTH Fittings
Galvanized Steel Eye Screw Pig Tail Eye Screw Hook Type Eye Screw
Hot-DIP Galvanized Anchor Ground Screw
Lag Screw HDG Hex Head Wood Screws Self Tapping Lag
Lag Screw for Pole Line Fitting
Tags: Bolt, Bolts and Nuts, jgtrade1, Screw