Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.
The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

• XLPE-insulated power cables to DIN VDE 0276 part 620, HD 620 S1 and IEC 60502
• Temperature Range
  During installation up to -5°C/+23°F
• Operating Temperature
  Max. +90°C/+194°F
• Short Circuit Temperature +250°C/+482°F
  (Short circuit duration up to 5 sec.)
• Nominal Voltages
  U₀/U 6/10 kV, 12/20 kV, 18/30 kV

• Operating Voltages for
  6/10 kV = max. 12 kV
  12/20 kV = max. 24 kV
  18/30 kV = max. 36 kV
• Test Voltages for
  6/10 kV = 15 kV
  12/20 kV = 30 kV
  18/30 kV = 45 kV
• Minimum Bending Radius
  During installation max. 15x cable Ø
• Power Ratings Table
  See Technical Information

• Circular bare aluminum-conductor of stranded wires to HD 383
• Inner semi-conducting coating
• Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1
• Outer extrusion of semi-conducting coating spliced with the insulation
• Wrapping of conductive material
• Shield: Braiding of copper wires with one or two tapes applied helically
• Wrapping
• PVC outer jacket, compound DMV6 to HD 620.1
• Jacket color: Red