Nxjg 1-20kv 35-240mm² 7.4-36.5kn Wedge Insulation Tension Clamp Overhead Insulated Cable Pull Plate Clamp
Nxjg 1-20kv 35-240mm² 7.4-36.5kn Wedge Insulation Tension Clamp Overhead Insulated Cable Pull Plate Clamp image
Get Latest Price Request a quote
Basic Info.
Packaging & Delivery
Product Description
Product Description
The NXJG series is suitable for the terminal of 10kV and below overhead insulated aluminum core wire (JKLYJ) or the insulator string at both ends of the stretched section to fix and tighten the overhead insulated wire. The product is divided into two types. Each type of insulating tension clamp is suitable for the tension rod and tower of ADSS optical cable in overhead lines. According to the ultimate tensile strength, running distance and outer diameter of the ADSS optical cable, the appropriate type of tension cable is selected. folder. For the integrity and reliability of the ADSS tension clamp function, it is generally not allowed to reuse it many times. Unless it is only used as a “pull clamp” to pull the cable. For good performance and personal safety, it is necessary to make sure that the type and specification of the fittings are consistent with the requirements of the optical cable before use.
When erecting cables, including railway cables, high-voltage cables, etc., tension clamps are required at the connection between cables and wire towers or poles. The tension clamp is used to fix the wire or the lightning protection wire to the tension insulator string of the non-straight pole tower. Tension clamps are used for corner, splice, and terminal connections.
Model Description
Technical parameters and structure dimensions
Product features and Installation matters
Installation matters:
1. Before installation, please check whether the logo on the side of the wedge core is matched with the wire to be installed;
2. After confirming that it is correct, connect the hanging plate with the connecting hardware, connect the connecting hardware with the insulator, and the opening of the body should be as low as possible;
3. Use the wire tensioner to take up the wire to a suitable position, put the insulated wire into the inner cavity of the body, and then put it into the insulating wedge-shaped core, while the two wedge-shaped cores are kept flush ;
4. Tap the end of the wedge-shaped core for pre-tightening. When tapping, do not tap the side of the wedge-shaped core and the insulation layer of the wire, and the two wedge cores should be flush with each other after tapping, then remove the wire tensioner and adjust the nut to meet the engineering requirements;
5. To ensure that the tension clamp does not pull the wire after tightening the wire, it is recommended to reserve at least 1 meter of wire length on the jumper side of the tail end of the wedge-shaped core.
Features:
1. The shell is cast with anti-oxidation high-strength aluminum alloy.
2. The wedge core is made of insulating reinforced plastic, the positive frequency withstand voltage is ≥18kV, and the voltage is maintained for 1 minute without breakdown.
3. There is no need to strip off the insulating layer, and it is common to the insulated aluminum core wire.
4. No power loss, the most energy-saving certified product.
5. Wedge-shaped structure, easy and reliable installation.
Product details
Products real shot
A corner of the production workshop
Product packaging
Product application case
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
We are China Nxjg 1-20kv 35-240mm² 7.4-36.5kn Wedge Insulation Tension Clamp Overhead Insulated Cable Pull Plate Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Bolt Type Tension Clamp Products
St 35-240mm² Bolt Type Copper Equipment Wire Clamps of Power Fittings
Mgg 50-200mm Bus-Bar Supports Fixing Clamp Substation Fitting
Dtk 25-240mm² 7-21mm Quick Connect Energy-Saving Electrical Connector
PGA 10-300mm² 34-133mm Energy-Saving Type Parallel Trench Wire Clamps for Overhead Cables
Jgwd 55-166mm High Voltage Cable Hoop Cable Retaining Clip
Popular cnkcele Products
Jdz (J) 3kv 6kv 10kv PT Cabinet Single-Phase Indoor Medium
Ggj 230V 400V High Quality Low Voltage Intelligent Reactive Power Compensation Cabinet
Tj 16-240mm² Copper Bolt Connection Wire Clamp Split Type Bolt Connector
Srm 12kv 630A 1250A Customized Inflatable High Voltage Switchgear of Various Specifications
Bjx 220/380V 10-400A Explosion Proof Anti-Corrosion Junction Box
Mwl 63-125mm Outdoor Supports for Bar (Vertical setting) Substation Fitting
Popular Nxjg 1-20kv 35-240mm² 7.4-36.5kn Wedge Insulation Tension Clamp Overhead Insulated Cable Pull Plate Clamp Products
Popular Overhead Insulated Conductor Fittings Products
PA Series 1kv 4-120mm² Overhead Cable Fixed Insulation Plastic Tensioning Clamp
Mwl 63-125mm Outdoor Supports for Bar (Vertical setting) Substation Fitting
Tags: Bolt Type Tension Clamp, cnkcele, Nxjg 1-20kv 35-240mm² 7.4-36.5kn Wedge Insulation Tension Clamp Overhead Insulated Cable Pull Plate Clamp, Overhead Insulated Conductor Fittings