OEM Copper Earth Rod for Ground Wire

Copper earth rod manufactured from high tensile low carbon steel by molecularly bonding 99.9% pure electrolytic copper, these earth rods conform to BS 4360 grade 43A. Each rod is treated with Benzol triozole derivatives to prevent oxidation of copper bonding. The threads are formed by roll threading process which ensure strength and maintain the molecularly bonded copper along the full length of the threads. The rods can be deep driven manually or by using power hammer.

PRODUCT TECHNICAL SPECIFICATION
Thickness of the copper layer is more than 0.254mm(all can be done to your demand)
The core steel rod shall have a tensile strength of not less than 580Nm/mm2.
The steel core is low carbon steel, and the carbon content is about 0.15%.
The purity of the copper using as cladding shall be 99.9% pure copper.
The Ground Rod will be capable of being through 90 at a maximum radius if 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.
Good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel.
PRODUCT SPECIFICATION

We can supply you three shapes as:
1) Earth Rod can be made double heads thread, thread can be packed by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is flat.
*Special size and copper thickness can be supplied on request.

PRODUCT APPLICATION
The product can be widely used in the communications industry, power systems, building systems, military installations, railway systems, broadcasting systems and other equipment industries, the AC and DC work, safely protected, especially suitable for harsh surface environment, corrosion resistance requirements to ground engineering, its market prospect is very broad.