Overhead Use Cable Wire ACSR/Tw Acss/Tw Tw Aluminium Conductor

Specifications
ACSS/TW conductors are manufactured in accordance with the ASTM specification B857.

Features
ACSS conductors are preferred over ACSR conductors for specific transmission line
Applications:
With zinc – 5% aluminum mischmetal alloy coating on steel wires, ACSS conductors can be operated
Up to 250 ° C.
ACSS conductors carry more current than ACSR conductors due to:
— Minimum average conductivity of 63% IACS for 1350-O aluminum wires vs. An average conductivity of 61.2% for 1350-H19 aluminum wires in ACSR.
— ACSS conductors can be operated up to 250 ° C vs. The maximum operating temperature for an ACSR conductor does not exceed 100 ° C.
ACSS conductors are prone to resist the effects of aeolian vibration due to very little or no mechanical load on the annealed aluminum wires.
Long term creep is not a factor when designing with ACSS conductors. In addition, use of ACSS/TW with the equal area design allows equal ampacity in a conductor with approximately 10% smaller diameter over a standard ACSS with same area. This smaller diameter of equal area ACSS/TW conductors helps reduce the effects of ice and wind loading on the conductor.
Alternatively, use of ACSS/TW with equal diameter design provides a conductor in which the aluminum area is increased by approximately 20% – 25% over a standard ACSS with same diameter. This increase
In the cross-sectional area of the conductor reduces its ac resistance by about 15% – 20% and thus, increases its current carrying capacity by about 10%.