Porcelain Reel Insulator 3¨ X3-1 / 8 Hole 1/16 "ANSI 53-2
Porcelain Reel Insulator 3¨ X3-1 / 8 Hole 1/16 "ANSI 53-2 image
Get Latest Price Request a quote
Quick Details
Product Details
CSA CANADIAN STANDARDS ASSOCIATION
G164-4 – Hot dip galvanizing of Irregular Shaped Articles
CAN/CSA – Quality Assurance Program Categories 2299.3
ANSI – AMERICAN NATIONAL STANDARDS INSTITUTE
C29.1 – American Standard Test Method For Electrical Power Insulators
C29.7 – American Standard For Wet-processed Porcelain Insulators (High Voltage Line Post Type) Electrical Power Insulators
987-1985 – IEEE Guide For Application of Composite Insulators
D750 – Recommended Practice for Operating Light and Weather Exposure Apparatus (Carbon Arc Type) For Artificial Weather Testing Of Rubber Compounds.
D1499 – Recommended Practice For Exposure of Plastics.
D2240 – Rubber Properties, Durometer Hardness
D2565 – Recommended Practice For Operating Xenon-Arc Light And Water Exposure Apparatus Plastics.
The weathershed of the Post Insulators shall be manufactured from either Hydrated Alumina Ethylene Propylene Copolymer (EPM) as the primary constituent or Silicone Elastomers. The weathershead shall be injection moulded and brought to final cure state in one continuous process to prevent internal undercure or surface overcure. Additionally, the weathershead shall provide hydrophobic surface, even after exposure to tropical marine environment, ultra violent rays and moisture.
Core
5 | Name of the material | "Reel porcelain insulator 3 "x 3-1 / 8", hole 1/16 ", ANSI 53-2 " |
|
6 | Isolating material | Porcelain | |
7 | Enamel Color | Gray according to ANSI 70 | |
8 | Class ANSI 53-2 | Printed on the insulator | |
9 | Standards | ANSI C29.3 | |
10 | Quality certificate | ISO-9001 or recent | |
11 | Finished | The surface of the insulator at the end of the process should be smooth and free of defects. |
|
12 | Identification mark | Printed under the varnish of the insulator legibly and indelibly manufacturer, country of origin, Class ANSI 53-2 |
|
Dimensional characteristics | |||
13 | Insulator height | inch(mm) | 3(76.2) |
14 | External diameter | inch(mm) | 3 1/9(79) |
15 | Inside diameter | inch(mm) | 17/24(18) |
16 | Diameter of the neck | inch(mm) | 1 71/92(45) |
17 | Weight | kg | 0.51(1.22) |
Electrical characteristics | |||
18 | Low to low frequency contouring voltage at 60 HZ | 25 | |
19 | Contour voltage at industrial frequency under horizontal | 15 | |
20 | Voltage of contour to industrial frequency under vertical rain | 12 | |
Mechanical characteristics | |||
21 | Transverse Mechanical Resistance | kN(lbs) | 13.3(2989) |
22 | Packaging | "The insulators should be packaged wooden fittings highly resistant for your transportation, storage and handling " |
The rod or the core is manufactured from Fibreglass, having 70-75 by weight of auxiliary aligned glass fibre bonded by an organic resin. The rod is either be cast or pultruded.
The end fittings are have the following properties:
i. are compressed onto the Fibreglass rod member
ii. are not move relative to the central Fibreglass rod at applied loads equal to two times the rated Routine Test Load or maximum designed cantilever loads
iii. are attracted to the rod after completion of all external heat processes used to cure or bond component parts.
The insulator are provided load limiting bases that will deform under longitudinal loading of more than 100% of the rated design cantilever load.
Performance Characteristics
The Polymeric Insulators are meet the under listed performance characteristics.
ITEM |
11kV |
33KV |
Dry Flashover Withstand |
90kV |
180kV |
Wet flashover withstand |
70kV |
165kV |
Positive Impulse Critical flashover |
145kV |
300kV |
Maximum Radio Interference Voltage |
Below 1micro volt |
Below 1 micro volt |
Design Tension Strength |
100kN |
100kN |
Residual Strength after Power Arc |
80kN |
80kN |
Mechanical Proof Test Load |
45kN |
45kN |
Maximum Sustained Load |
34kN |
34kN |
Design Torque Rating |
83 Nm |
83 Nm |
The insulator are suitable for accepting both aluminium and copper conductors having cross-sectional areas ranging from 35mm2 to 265mm2. The insulators are designed for mounting on the angle and channel crossarms specified in Specification E14
All exposed ferrous part shall be treated against corrosion. Treatment by hot dip galvanizing is preferable.
We are China Porcelain Reel Insulator 3¨ X3-1 / 8 Hole 1/16 "ANSI 53-2 manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Composite Insulator Products
Fxbw-66/70, 66kv, 69kv Long Rod Suspension Insulator Used in Overhead Line
220kv Long Rod Composite Insulator/ Silicone Polymer Insulator
High Quality Electric Suspension Fencing Spool Insulator
Epoxy Resin Contact Box Spout Bushing Insulator
35kv Composite Station Post Insulator
Popular jgtrade1 Products
Straight Joint Waterproof Junction Box Selection Table
Hot Selling Polymer 24kv Surge Lightning Arrester
Connector Perforation 2/0-336 / #8-#2
Grading & Shielding Rings Aluminium
Popular Reel Insulator Products
Stranded Sheathed Flexible Copper Wire Series
Porcelain BS Spool Insulators Shackle Insulator for Earthing
Isolating Stem Porcelain 13.2kv Type, Thread 1 ", ANSI 55-4.
Popular Silicone Rubber Insulator Products
120kn Silicone Rubber Composite Insulator for Support Cable
Fxbw-15/70 Polymer Composite Suspension Insulator (IEC Standard)
Porcelain Insulator Type Spike 24.9 Kv, Thread 1-3 / 8 ", ANSI 56-1
Winding Insulation Measuring Rope
Bolt & Nut, Machine 5/8" X 12"
Tags: Composite Insulator, jgtrade1, Reel Insulator, Silicone Rubber Insulator