Rear Connector with Surge Arrester

Plug Type Accessories
,Plug type accessories,also named Separable Connectors.It includes
separable Elbow,straight and Tee connector kits.Our separable connectors
are widely used in switchgears,transformers,cabinets and other electrical
equipments.It is made of EPDM or silicone rubber with integrated field
control.And adopts advanced triple-layer( a conductive inner layer,an
insulation layer and a conductive outer layer) injection technique to
guarantee the interface property to avoid gaps between layers and
decrease partial discharge maximally.Our separable connectors are
mainly includes IEC type & IEEE type.
Executive standard
DIN47636-7-1990 , Um
36kV
ANSIIEEE592-1990

BS-EN50180-50181
IEC60502 1kV(Um=1.2kV) 30kV(Um=36kV)

IEC61442 6kV(Um=7.2kV) 30kV(Um=36kV)

GB/T12706-2008 1kV(Um=1.2kV) 35kV(Um=40.5kV)

GB311.1-1997
GB/T41.9-1999
GB11032-2010
JB/T10739-2007 6kV(Um=7.2kV) 35kV(Um=40.5kV)

EN 50181 Plug-in type bushings above 1kV up to 52kV and from 250A to
2.5kA for equipment other than liquid filled transformers
EN 50180 Bushings above 1kV up to 36kV and from 250A to 3.15kA for
liquid filled transformers
HD629.1 Test requirements on accessories for used on power cables of
rated voltage from 3.6/6(7.2)kV up to 20.8/36(42)kV-Part 1:cables with
extruded insulation
IEC 60502.4 Power cable with extruded insulation and their accessories
for rated voltages from 1kV(U=1.2kV)up to 30kV(U=36kV)-part 4:test
requirements on accessories for cable with rated voltages from 6kV up to
30kV(U=36kV)
lEc60099 Metal oxide surge arresters without gaps for a.c.systems
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for
a.c.systems
IEEE 386 Separable insulated connector system for power distribution
system above 600V
GB11032 Metal oxide surge arresters without gaps for a.c.system
JB/T 8952 Polymer-housed metal oxide surge arresters without gaps for
a.c.systems