Silicone Housing Arrester Lightning for Over-Voltage Protection
Silicone Housing Arrester Lightning for Over-Voltage Protection image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
| Type: |
Y5W5-108/259 |
||
| Rated voltage———kV | 108 | 4/10µS High current impulse kA | 100 |
| MCOV —————-kV | 86 | Lightning impulse withstand kV | 550 |
| Nominal Current——-kA | 5 | Power frequency voltage withstand(dry/wet)kV | 230 |
| Residual voltage of steep impulse—-at 5kA(kV) | 339 | 0.1S TOV————–kV | 129.6 |
| 8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 281 | 1S TOV—————-kV | 124.2 |
| Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 220 | 10S TOV—————kV | 118.8 |
| 1mA D.C reference voltage (kV) | 157 | 1200S TOV————-kV | 108 |
| Line discharge level | 2 | Creepage distance —-mm | 3906 |
| 2mS long duration impulse current A | 600 | Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
| Environment temperature: -40–+40 degree | |||||||
| altitude:<1000m | |||||||
| 48HZ<Rated frequency<62HZ | |||||||
| Power frequency voltage should not be more than continuous running voltage | |||||||
| Max wind speed should be less than 35m/s | |||||||
| Earthquake intensity should be less than 7 degree | |||||||
| If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China Silicone Housing Arrester Lightning for Over-Voltage Protection manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
3 Phase Vertical Break Disconnector with Motor
Electrical Transformer Type High Quality Lightning Protection Materials
Zinc Oxide Arresteor Surge Arrestor High Quality
500kv Substation Type Polymer Housed Lightning Arrester Price 33kv
Outdoor Polymeric Housed Metal Oxide Arresters Surge Protector for 132kv
Lighting Arrester/Lightning Rod Lightning Arrestor
Popular Lightning Arrester Products
(YH5W-11) Polymeric Housed Metal-Oxide Surge Arrester Without Gaps
Polymer Housed Gapless Surge Arrester From 3 Kv up to 36 Kv
MOV Metal-Oxide Lightning Protector/ Surge Arrester (YH5W)
9-15 Kv Polymer Lightning Arrester Surge Arrester
11kv Silicone Rubber Lightning Arrester
Popular Surge Arrester Products
High Voltage Substation Lightning Arresters Manufacturers of 66kv Surge Arrester
30kv High Quality Electrical Surge Arrester for Transmission Line
27kv Polymeric Housed Metal Oxide Surge Arrester
Kema Tested Electrical Equipments Rated Voltage 102kv Polymeric Surge Diverters
22kv Polymer Housing Surge Arrester
Factory Supply 11kv 33kv 36kv Silicon Rubber Lightning Arresters
Popular Surge Arresters Products
200kv Metal Oxide Surge Diverters for Electric Station
Zinc Oxide Varistors For Surge Arresters
Kema Tested High Voltage ZnO Surge Arresters with Factory Price
Outdoor Distribution Type Polymer Housed 12kv Gapless Lightning Arrester
5kv 10kv 10ka Composite Silicon Rubber Zinc Oxide Surge Arresters
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters
