Stranded Copper Conductor XLPE Insulated Multipair Individual & Collective Screen Flame Retardant PVC Sheath Cable

 
Application                                                                                                                                                    
For transmission of analogue and digital signals in instrument and control systems; use in zone 1 and zone 2 group
ΙΙ classified areas (IEC 60079 part 14). Not allowed for direct connection to low impedance source, e.g. the public
mains electricity supply.
Recommended for direct burial. For indoor and outdoor installation in dry and wet locations on racks, in conduits.
1. Conductor: Plain annealed copper, sizes: 0.5 mm² solid, 1.0 mm² solid, 0.5 mm² flexible, 0.75 mm² flexible or 1.5mm²         
                       stranded
2. Insulation: Polyethylene PE
Colour code: black / blue;
with numbered tape under separator tape of the pair screen
3. Pair screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
4. Collective screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
5. Bedding: polyethylene PE, black
6. Armour: galvanized round steel wires
7. Outer sheath: Polyvinyl chloride PVC, black
                            *Flame retardant
                            *Oil resistant,
                           *Anti-rodent&termite
These properties could be offered upon requested.
Technical Data                                                                                                                                
 Temperature range:
-40°C up to +70°C (during operation)
– 5°C up to +50°C (during installation)
Min. bending radius:
8 x cable-Ø