Temperature Measuring Device - Thermal Camera

The Surge Counter with Current Meter for surges without gaps in a.c. system(type JC) is fully tested for use with metal oxide arrester thus ensuring a comprehensive monitoring system. The instrument which require no auxilliary power supply, is designed for installation at the earth connections of a single surge arrester.The instrument is housed inside a stainless-steel enclosure .The main parts of instrument is installed on a aluminium plate , and the stainless enclosure with a glass window . The glass window is glued by silicone polymer. Aluminium flange has two mounting holes.The holes are earth terminal. Under normal operating condition , no maintenance is required ,apart from the general cleaning of the glass and the ceramic line terminal bushing.
Technical parameters

Test of monitors:
Charge the 10μF capacitor until the voltage reaches 300V at least and on more than 600V, then discharge the capacitor to the monitor ,making sure that the meter adds digit 1 to its original figure.
Test of the milliameter:
Connect a digital multmeter to the two terminals of the instrument, making sure that its hand points to several hundreds of μA.

Technical parameters

Type: JCQ-10/800
   Nominal discharge current : 10kA 8/20μs  wave           
 Residual voltage : 0.8kV peak
Long duration current impulse withstand : 800A 2ms wave
    Maximum high current withstant : 100kA  4/10μs wave
           Minimum count current : 50A  8/20μs wave
    Over-current withstand capacity : 100mA 48~62Hz
                     Meter scale : 0~3mA even
                        Counter : 3 digit cyclometer
  under continuous operating Voltage : <3V
Weight:2.2Kg