Terminal, Aluminium Compression-Cableto Flat-4 Hole: Acf 350c

China 
                        Terminal, Aluminium Compression-Cableto Flat-4 Hole: Acf 350c
                      manufacture and supplier

Terminal, Aluminium Compression-Cableto Flat-4 Hole: Acf 350c image

Get Latest Price Request a quote

Quick Details

Terminal, Aluminium Compression-Cableto Flat-4 Hole: Acf 350c

IEC IEEE

Fuse Link

T K

Circle

High Voltage

Distribution

High

OEIpower

Cartons Pallets Wooden Case

IEC IEEE

China Nanyang

85351000

Product Details


TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type MZ has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.

Pure aluminum cast compression terminal for connecting aluminum cable to flat pad. Connector barrel is filled with rubber compatible sealant and enclosed in clear plastic bags. Contact sealant is recommended on the pads. Pad holes have NEMA spacing. For use with conventional       compression tooling.

Performance Characteristic
Applied standard IEC60282-2
Catalog number  
Nominal system voltage kV 11
Rated Frequency Hz 50
Rated m aximum(design) voltage 12
Rated Continuous current A-RMS 100
Rated Interrupting current asymmetrical/symmetrical A-RMS 12000/8000
BIL 1.2×50 µs kV-peak 125
Minimum critical impulse flashover voltage(CFO)KV peak 140
Dry withstand voltage kV-RMS 42
Wet withstand voltage kV-RMS 36
Creepage distance to group Min.mm 372
Minimum creepage factor of insulator (Creepage Distance/arcing distance) N/A
View More  

Not exactly what you want?

Post Sourcing Request

Hot Searches

Fuse
Protection Fuse
Fuse Box
Fast Fuse
Fuse Out
Fuse Unit
View More 

We are China Terminal, Aluminium Compression-Cableto Flat-4 Hole: Acf 350c manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote

Popular Arc Chute Type Products

Ceramic Drop Fuse 11kv 20kv 24kv 33kv 36kv 38kv 100A 200A 300A Circuit Breaker

Expulsion Fuses

Resin Insulated Dry Type Transformer

V Type D Fuse 33kv

Los Cortacircuitos De Expulsió N Cut-out

Outdoor Single Pole Fused Recloser by-Pass Switches 33kv

Popular Interrupter Products

V Type D Fuse 18kv

Box Type Fixed AC Metal Enclosed Switchgear

Medium Voltage Fuse Cutouts

Fuse Link, 8 AMPS -K

High-Voltage Fuses Fuse-Link 15.5kv

36 Kv, 10 Ka, 1pH, Surge Arrester

Popular jgtrade1 Products

Hard Drawn Copper and Aluminium Conductors

"K" and "T" Type Fuse Link

Nxlh Alloy-Aluminium Strain Clamp

Nlz-2 Deadend Clamp

Insulating Baffle

Polymepolymer Fuse Cutout, Drop out Fuses 18kv 200A

Popular Loadbreak Cutout Products

11kv 2A Expulsion Fuse Link

Surge Arresters 30kv Mounted on Crossarm

Switch Disconnector Fuse Holder, 21 Kv - 200 AMP, Without Arc Chute

24-27kv 200A Silicon Rubber Drop-out Fuse Cutout

Best Price24kv 200A Ceramic Types Drop out Fuses Cutout/Cut out Fuse

Fixed Enclosed Switchgear

Tags: , , ,

FAST AND RELIABLE SERVICE FOR YOUR PROJECT

Contact our trained experts today to find your perfect power solution.

ASK A QUESTION