Thhn 12 Gauge Wire Thhn 4 Gauge 6 Gauge 8 Gauge 14 Gauge 16 Gauge UL 500FT 600V

Thhn 12 Gauge Wire THHN 4 Gauge 6 Gauge 8 Gauge 14 Gauge 16 Gauge UL 500ft 600V

Applications:
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). Type THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type MTW conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations.

Also Known As:
Our THHN 12 1 wire is a part of our large catalog of hook-up and lead wire. This wire features a 12 AWG solid bare copper conductor, PVC insulation, and a Nylon jacket. This bare copper building wire has a voltage rating of 600V and a maximum temperature of 90°C. It is suitable for use as general-purpose wiring for installation in conduit, cable trays, or other recognized raceway. Our solid THHN wire is UL approved and available in 14 to 1000 AWG. 

Features:
Nylon outer jacket for easy pulling. VW-1 rated 14 AWG – 8 AWG. All sizes are rated gasoline and oil-resistant II.

Jacket:
A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.

Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Standards Association C22.2 No. 75
NEMA WC70/ICEA S-95-658
Institute of Electrical and Electronics Engineers

Construction:
Conductors:
Solid, uncoated copper conductors per ASTM-B3
Stranded, uncoated copper conductors per ASTM-B3, ASTM-B787 and ASTM-B8
Insulation:
Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8

12 AWG THHN/THWN-2  
Size: 12 AWG
Number of Strands: 19
Cross Section Area (mm2): 3.31
PVC Insulation Thickness (Conductor): 0.380 mm / 0.015 inches
Nylon Jacket Thickness: 0.100 mm / 0.004 inches
Outside Diameter: 3.23 mm / 0.127 inches
Allowable Ampacity: 20 Amps at 60ºC / 20 Amps at 75ºC / 20 Amps at 90ºC
*Data provided on this page is subject to change based on different manufacturers variances.

Production process

Package
Package by roll or in Export Wooden or Steel Wooden or Steel Drums

Testing

FAQ
Q:I didn’t find the ACSR Bare Conductor Cable which I need in this page?
A:If you didn’t find the species of cables you need, please contact us directly, we will reply you quickly.