U Clamp
U Clamp image
Get Latest Price Request a quote
Quick Details
Product Details
U Clamp
PART 1 GENERAL
1.01 SCOPE
This Specification covers the design, manufacturing, testing supply, delivery and performance requirements of D Bracket for use on overhead networks.
1.02 STANDARDS
The fittings comply with the latest editions of, and amendments to, the standards listed below:
BS – British Standards Institution
BS 3288 – Insulator and Conductor Fittings for Overhead Power Lines
BS EN ISO 1461 – Hot Dip Galvanized Coatings on Iron and Steel Articles
VDE – Verband Deutscher Elecktrotechniker
VDE 0202 – Requirements for aluminum for Electrical Technology
DIN – Deutsche Industrie Normen
DIN 6796 – Conic spring Washers
1.03 SERVICE CONDITIONS
Suitable for outdoor use in the Tropical zone,with a maximum ambient temperature of approximately 30degrees centigrade with heavy rainfall and high humidity of approximately 100% .
1.04 SYSTEM CONDITIONS
Comply the Customer requirment.
1.05 TESTING
A. Routine Tests
1. Routine tests carried out on all units of a particular type.
2. Mechanical routine testing will be carried out in accordance with BS 3288; Part 1.
3. The results of these tests will be recorded on a Routine Test Certificate.
4. Routine Test Certificates will include, in addition to the test results, the Purchaser’s Order Number.
B. Type Tests
1. Type tests will be carried out on individual units of a particular type.
2. Type tests will be in accordance with BS 3288: Part 1.
C. Sample Tests
1. Method of sampling and testing and test parameters shall be in accordance with BS 3288: Part 1.
2. Test results shall be recorded in the same manner as routine tests.
D. Inspection
The Purchaser reserves the right to witness the manufacturing process, any type tests specifically performed on the insulators to be supplied to ECG and any routine tests required in the manufacture and supply of the insulators and fittings. The Supplier shall provide free access to the Purchaser to any site where such manufacturing process, or tests, either type or routine tests are taking place. The Supplier shall bear the in plant costs of such inspection. The Supplier shall provide the Purchaser of a schedule of manufacture and tests at least two weeks before the events are to occur.
1.06 SPARES
(Not Applicable)
1.07 PACKING AND SHIPMENT
Export Standard
1.08 SUBMITTAL
As specified Of Customer
PART 2 PRODUCTS
2.01 DESIGN
According to the Drawing Attach
We are China U Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
Overhead Bare Twisted Aluminium Conductor for Transmission Line
Five or More Core Aluminium Conductor Overhead Cable
Terminal Connectors for Horizontal Tubular Bus-Bar Type Mgp
BS Standard All Aluminium Conductor Sranded Aluminum Wires Overhead Conductor
Popular jgtrade1 Products
Best Price24kv 200A Ceramic Types Drop out Fuses Cutout/Cut out Fuse
Switch Disconnector Fuse Holder, 24 Kv - 100 AMP, Without Arc Chute
High Voltage Lightning and Surge Arrester
Sharp Head 9kv 10ka, Surge Arrester
Switch Disconnector Fuse Holder, 36 Kv - 100 AMP, Without Arc Chute
Popular Pole Line Hardware Products
Galvanized Extension Link for Pole Line Hardware
Hot DIP Galvanized Steel Parallel Structure Pd Type Clevis/Link Plate
Hot DIP Galvanized Forged Thimble Eye Bolt (G0650-08) for Pole Line Hardware
Bolted Tension String D Shackle Ball Eye Socket/Tongue and Bolted Tension (four U Bolts) Clamp
New Design Down Lead Clamp for ADSS for Pole
Popular Tension Clamp Products
400m Span High Quality Tension Clamp Preformed Dead End Clamp
Snail Clamp 70kn Tension Clamp
Anchor Clamp with Plastic Washer/ Wedge Clamp
High Quality Preformed Dead End Guy Grip for ADSS or Opgw Cable Strain Tension Cable Clamp
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp