U-Shaped Conductor Twisted 90 Degrees
U-Shaped Conductor Twisted 90 Degrees image
Get Latest Price Request a quote
Quick Details
Product Details
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Power Line
Electrical Hardware
Electric Power Car
Network Hardware
Hardware Cable
We are China U-Shaped Conductor Twisted 90 Degrees manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
All Aluminium Conductor Service Drop Bare Conductor 25mm2 Cable
Aluminium Conductor Overhead XLPE Insulation Medium Voltage ABC Cable
Bare Aluminum Cable All Aluminum Alloy Conductor ASTM B399
ACSR Conductor Price List ACSR 95mm2 Cable ACSR Wire Sizes
Overhead Conductor AAC AAAC ACSR 50mm2 70mm2 120mm2 Power Cable
Popular jgtrade1 Products
Pole Line Hardware Fittings Galvanized Aluminum Alloy Strain Clamp
Fuse Cutout, Drop out Fuses 11kv 100A
Single Flexible Bus-Bar Supports Type Mdg
Popular Pole Line Hardware Products
Pole Line Hardware/ Casting Forged Carbon Steel Insulator Fitting
Socket Tongue for Pole Line Hardware/Overhead Line Fitting/Line Fitting
Rubber Parallel Groove Clamp for Cable Down Leading
Short Span Cable Connector Tension Clamp for Overhead Line
Socket Clevis for Electric Power Fittings
Forged Oval Shoulder Eye Bolt Hot DIP Galvanized
Popular Tension Clamp Products
FTTH Cable Tension Anchor Clamp
Aluminium Alloy Bolted Strain Tension Dead End Clamp
Galvanized Malleable Iron Nld-1 Nld-2 Nld-3 Nld-4 Strain Clamp with U Bolts
Nll-2A Bolt Type Aluminium Alloy Tension Clamp Strain Clamp Power Fittings
Aluminium Alloy Suspension Clamp Csg-3
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp