UL854 600V 4/0-4/0-2/0-4AWG XLPE Insulated Use-2/Rhh/Rhw-2

The High Quality 600V Aluminum/AA8000/Copper Conductor Rhh/Rhw-2/Use-2 XLPE Insulation Power Cable with UL 44 Cable

APPLICATION
Type SE, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SER may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating is 600 volts.

PRODUCT FEATURES

• Type SE cable is constructed with AA-8000 series aluminum alloy, compact stranded conductors.
• Cross-linked polyethylene insulation rated for a maximum operation temperature of 90°C in wet and dry locations.
• Eco friendly sunlight resistant, flame retardant and heavy metal free Polyvinyl Chloride (PVC) Jacket.
• Insulation and Jacket materials are in compliance with RoHS, Directive 2002/95/EC.
• Sequential foot markings for easier inventory control management.

STANDARDS & REFERENCES
Type SE cable complies with :
• ASTM- All applicable standards
• UL Standard 44 for XHHW-2 conductors
• UL Standard 83 for THHN/THWN conductors
• UL Standard 854
• Federal Specification A-A-59544
• National Electrical Code, NFPA 70. 2011 Edition
• RoHS/ REACH

CONSTRUCTION
Conductor: compact copper or AA-8000 series aluminum alloy, compact stranded
Insulation:Cross-linked polyethylene(XLPE) insulation with property of heat.Moistrure and abrasion resistance and flame retardant.
Sheath:sunlight resistant gray polyvinyl chloride (PVC).

Type SE cable is constructed with sunlight resistant Type XHHW-2 conductors or Type THHN/THWN conductors.Cable assembly plus reinforcement tape are jacketed with sunlight resistant gray polyvinyl chloride (PVC). Available as 1 conductor with a concentric ground, 2 conductor with a round or concentric
ground, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant polyvinyl chloride (PVC).

Aluminum Specifications:

1. Data are approximate and subject to normal manufacturing tolerances. 
2. Standard lengths are subject to normal manufacturing tolerance of +/- 10% 
3. To determine correct ampacity by conductor size, please consult the National Electric Code, latest edition.
4. Table values reflect XHHW-2 aluminum conductors
5.Package:A-500′ B-2,500′ C-1,000′ D-5,000′