VV22/VV23, Vlv22/Vlv23 Power Cable PVC Sheath/PE Sheath
VV22/VV23, Vlv22/Vlv23 Power Cable PVC Sheath/PE Sheath image
Get Latest Price Request a quote
Quick Details
Product Details
Power Cable
Standards
Products can be manufactured according to GB standard, IEC standard, ASTM standard, BS standard and DIN and other standard and customers` specific requirements.
Specification
1. Conductors: Copper or aluminum.
2. Both armored and non-armored type power cables are available.
3. Voltage rating: 0.6/1kV 3.6/6kV 6/10kV 8.7/15kV 26/35kV.
4. PVC or XLPE sheathed.
5. Number of cable cores: One core (Single core), two cores(Double cores), three cores, four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core), five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).
Characteristics of Cable
1. Max Long-time operating temperature of PVC insulated cable is 70° C, XLPE 90° C
2. Installing temperature of cable should not be less than 0° C
3. Max short-circuit temperature is: PVC not exceed 160° C, XLPE 250° C, Not more than5 Sec.
4. Permitting bending radius cable: Not less than 10 D times (D: External diameter of cable)
5. Perfect chemical stability, resistant against acids, alkali, grease and organic solvents, and flamer retardant.
Number of Cores & Nominal Cross-section Area
Installation:
1. The installation temperature should not over 20º C, If the ambient temperature is lower than 0º C, the cable should be preheated.
2. The bending radius of cable should not less than 8 times.
3. After installantion, the cable should with stand voltage test for 15min. 35kv D. C.
In air:
1. As the single core cable laying in parallel, the distance between the cable’s center is 2 times (for cables which cross section area of conductor ≤ 185mm2) and
90mm (for cables which cross sectional area of conductor≥ 240mm2)
2. Ambient temperature: 30º C
3. Max. Temperature of conductor: 70º C
4. Rating factors of current rating for ambient temperature:
Direct in ground:
1. When the single core cables are installed separately, the distance between the cable’s center is 2 times of the cable diameter.
2. Ambient temperature: 25º C.
3. Max. Temperature of conductor: 70º C.
4. Soil thermour resistivity: 1.0º C. M/w.
5. Depth: 0.7m
6. Rating factors under different ambient temp.:
PVC Insulation Electric Cable
XLPE Insulated electric cable
We are China VV22/VV23, Vlv22/Vlv23 Power Cable PVC Sheath/PE Sheath manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular huatongcable Products
Uganda PVC Insulated Twin and Earth Flat Copper Wire
High Quality Aluminium-Clad Steel Conductors Acs with ASTM B416
High Voltage Disc Insulator Insulator Wholesale Insulators
110kv Transmission Line ACSR/AAC/AAAC/Gsw Bare Aluminium Conductor
All Aluminum Alloy Conductor AAAC ASTM BS IEC DIN CSA 48.69 Kcmil Alton
Aerial Bundled Cable XLPE Insulated 4*120mm2 - AS/NZS 3560.1
Popular Power Cable Products
Aluminum Core Power Cable/XLPE Insulation PVC Jacket Amoured Power Cable 4*185mm2
Power Cable PVC/XLPE Insulated Ce Approved
1/0AWG 2 Single Conductors medium voltage power cable Control cable
4 Cores Wires Aluminum Conductor Overhead Arial Bundled Cable Low Voltage ABC Cable
XLPE Power Cable 3X50mm2 Low Voltage Cables Power Cable