Xgn2-12 Box-Type Fixed Metal-Enclosed Switchgear
Xgn2-12 Box-Type Fixed Metal-Enclosed Switchgear image
Get Latest Price Request a quote
Basic Info.
Product Description
Product Description
XGN2-12 box-type fixed metal-enclosed switchgear (referred to as switchgear) is used for receiving and distributing electric energy in 3.6, 7.2, 12kv three-phase AC 50Hz systems, suitable for frequent operation occasions, and its busbar system is a single busbar (and can be derived single bus with bypass and double bus structure). The switchgear meets the requirements of the national standard GB3906-91 (3-35kv AC metal-enclosed switchgear) and the national standard IEC298, and has two proposed “five-proof” locking functions.
The main switch of the switch cabinet adopts ZN28-12 series vacuum circuit breaker, equipped with CDI7 series electromagnetic operating mechanism or CT19 series spring operating mechanism, and the isolating switch adopts GN30-12 rotary isolating switch or GN22-12 high current isolating switch series.
Model Description
Product technical parameters and external dimensions
Main circuit scheme
Product features
1: The switch cabinet is a metal closed box structure, and the cabinet frame is welded with angle steel. The cabinet is divided into circuit breaker room, bus room, cable room and relay room. The interior is separated by steel plates.
2: The circuit breaker room is located at the lower part of the cabinet, and the circuit breaker drive is connected by the pull rod and the operating mechanism; the lower end of the circuit breaker is connected to the current transformer, the current transformer is connected to the isolating switch terminal, and the upper end of the circuit breaker is connected to the isolating switch terminal. The circuit breaker room is also provided with a pressure relief channel. If arcing occurs inside, the gas can be released through the exhaust channel.
3: The busbar compartment is at the rear upper part of the cabinet. In order to reduce the height of the cabinet, The busbar arrangement shape is , it is supported by a porcelain insulator with a bending strength of 7350N, and the busbar is connected to the upper isolating switch terminal.
4: The cable compartment is behind the lower part of the cabinet. The support insulators in the cable compartment can be equipped with monitoring devices and the cables are fixed on the brackets. The contact is the wiring communication cable M of this room
5: The operating mechanism of the circuit breaker is installed at the lower left, above which is the operating interlocking mechanism of the isolating switch.
6: The switch cabinet is double-sided maintenance. In the front, the secondary components of the relay room are inspected, the operating mechanism, mechanical interlock and transmission parts are maintained, the circuit breaker is inspected, and the upper busbar and cable terminals are repaired in the rear. Lights are installed in the circuit breaker room and the cable room.
7:There is a grounding copper bar parallel to the width of the cabinet below the front, and its cross-section is 4*40mm². Mechanical interlock: prevent the on-load isolating switch; prevent the circuit breaker from accidentally opening and closing; prevent the grounding knife from closing.
Environment condition
1. Ambient air temperature: -5~+40 and the average temperature should not exceed +35 in 24h.
2. Install and use indoors. Altitude above sea level for operation site should not exceed 2000M.
3. Relative humidity should not exceed 50% at max temperature +40. Higher relative humidity is allowed at lower temperature. Ex. 90% at +20. But in view of the temperature change, it is possible that moderate dews will produce casually.
4. Installation gradient not exceed 5.
5. Install in the places without fierce vibration and shock and the sites insufficient to erode the electrical components.
6. Any specific requirement, consult with manufactory.
Product details
Products real shot
A corner of the production workshop
Product packaging
Product application case
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
We are China Xgn2-12 Box-Type Fixed Metal-Enclosed Switchgear manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular cnkcele Products
Xcs 220kv 21-45mm Electric Power Fittings Aluminum Alloy Suspension Clamps for Twin Conductors
Zw32-12D Outdoor Floor-Standing Prepaid Metering Device Vacuum Circuit Breaker
Dgs Series 30-200W 127V Mine Explosion-Proof LED Projection Lamp (Mine Flameproof LED Flood Light)
Popular Combined Switchgear Products
Kyn61 40.5kv 1250A 1600A 2000A Armoured Removable High Voltage Switchgear Complete Set
Ggj 230V 400V High Quality Low Voltage Intelligent Reactive Power Compensation Switchgear
SMC 3800V 100-1000A Fiberglass Low-Voltage Intelligent Integrated Cable Distribution Box
Mns 380V 660V 5000A Best Low-Voltage Withdrawable Switchgear Switch Cabinet
Gtxgn 12kv 630A 1250A High Voltage Solid Insulation Ring Network Switchgear Switch Cabinet
Gtxgn 12kv 1250A High Voltage Solid Insulation Ring Network Cabinet Hv Switchgear
Popular Vacuum Switch Cabinet Products
Xgn2 3.6kv 7.2kv 12kv 630-2500A China Indoor Box-Type Fixed Metal Enclosed Switchgear