XLPE Insulated Power Cable, 12/20kv PVC Sheathed Power Cable

Specification
1. Conductors: Copper or aluminum.
2. Both armored and non-armored type power cables are available.
3. Voltage rating: 0.6/1kV 3.6/6kV 6/10kV 8.7/15kV 26/35kV.
4. PVC or XLPE sheathed.
5. Number of cable cores: One core (Single core), two cores(Double cores), three cores,
Four cores (Four Equal-section-area cores or three equal-section area cores and one smaller section area neutral core),
Five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).
6. Standards: IEC 60502. IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.

Characteristics of Cable
1. Max Long-time operating temperature of PVC insulated cable is 70° C, XLPE 90° C
2. Installing temperature of cable should not be less than 0° C
3. Max short-circuit temperature is: PVC not exceed 160° C, XLPE 250° C, Not more than5 Sec.
4. Permitting bending radius cable: Not less than 10 D times (D: External diameter of cable)
5. Perfect chemical stability, resistant against acids, alkali, grease and organic solvents, and flamer retardant.

Number of Cores & Nominal Cross-section Area

Installation:
1. The installation temperature should not over 20º C, If the ambient temperature is lower than 0º C, the cable should be preheated.
2. The bending radius of cable should not less than 8 times.
3. After installantion, the cable should with stand voltage test for 15min. 3.5kv D. C.

In air:
1. As the single core cable laying in parallel, the distance between the cable’s center is 2 times (for cables which cross section area of conductor ≤ 185mm2) and
90mm (for cables which cross sectional area of conductor≥ 240mm2)
2. Ambient temperature: 30º C
3. Max. Temperature of conductor: 70º C
4. Rating factors of current rating for ambient temperature:

Direct in ground:
1. When the single core cables are installed separately, the distance between the cable’s center is 2 times of the cable diameter.
2. Ambient temperature: 25º C.
3. Max. Temperature of conductor: 70º C.
4. Soil thermour resistivity: 1.0º C. M/w.
5. Depth: 0.7m
6. Rating factors under different ambient temp.:

PVC Insulation Electric Cable

XLPE Insulated electric cable

Your best choice → Huatong Cable Inc.
(1), More than 30 years experience.
(2), 100, 000m² Factory, 200 staffs, annual output 100, 000 metic tons.
(3), Sound Quality Control
–Material inspection;
–manufacturing inspection;
— Finished products inspection;
— Inspection before delivery.
–Third party inspection.
— Inspection of storage at port of departure.
(4), ISO Certificated.
(5), Plenty of material and lobor gurantee the delivery prompt and price competitive.
(6), 24/7 service