100mm2 Snail Clamp - Tension Clamp – 45kn
100mm2 Snail Clamp - Tension Clamp – 45kn image
Get Latest Price Request a quote
Quick Details
Product Details
Gama 20 kV a 36 kV
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Protection Fuse
Fuse Box
Fast Fuse
Fuse Out
Fuse Unit
We are China 100mm2 Snail Clamp - Tension Clamp – 45kn manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Arc Chute Type Products
Polymer Cutouts Porcelain Cutouts 12-36kv
33kv Expulsion Fuse Double Poles
36kv Polymer Cutouts Distribution Class
Hot Selling Factory 12kv Dropout Porcelain Fuse Cutout
11kv-27kv 100A Silicon Rubber Drop-out Fuse Cutout
Popular Interrupter Products
Switch Disconnector Fuse Holder, 18 Kv - 200 AMP, Without Arc Chute
24-27kv 100A Silicon Rubber Drop-out Fuse Cutout
Drop-out Outdoor High Voltage Expulsion Dropout Fuse Cutout 24kv 100A Cut out
Popular jgtrade1 Products
2.2dimension Test for Suspension Cable Tie 3.6X300mm:
Fuse Cutout, Drop out Fuses 18kv 300A
Disconnecting Cutouts Accessories
Flocking Liner Fully Dipped Blue Nitrile
Flexible Terminal Connectors for Tubular Bus-Bar Type Mds, Group C
Popular Loadbreak Cutout Products
Switch Disconnector Fuse Holder, 18 Kv - 200 AMP, Without Arc Chute
Terminal Connectors Bolted Type, Type SL, Group C
Switch Disconnector Fuse Holder, 27 Kv - 200 AMP, Without Arc Chute
Tags: Arc Chute Type, Interrupter, jgtrade1, Loadbreak Cutout