10ka Power Station Type Ceramic ZnO Surge Diverters with Silicone Housed
10ka Power Station Type Ceramic ZnO Surge Diverters with Silicone Housed image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
Type | Y10W5-108/281 |
Rated Voltage———kV | 108 |
MCOV —————-kV | 86 |
Nominal Current——-kA | 10 |
Residual voltage of steep impulse—-at 5kA(kV) | 325 |
8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 274 |
Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 215 |
1mA D.C reference voltage (kV) | 157 |
Line discharge level | 3 |
2mS long duration impulse current A | 850 |
4/10µS High current impulse kA | 100 |
Lightning impulse withstand kV | 550 |
Power frequency voltage withstand(dry/wet)kV | 230 |
0.1S TOV————–kV | 129.6 |
1S TOV—————-kV | 124.2 |
10S TOV—————kV | 118.8 |
1200S TOV————-kV | 108 |
Creepage distance —-mm | 3906 |
Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
Environment temperature: -40–+40 degree | |||||||
altitude:<1000m | |||||||
48HZ<Rated frequency<62HZ | |||||||
Power frequency voltage should not be more than continuous running voltage | |||||||
Max wind speed should be less than 35m/s | |||||||
Earthquake intensity should be less than 7 degree | |||||||
If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China 10ka Power Station Type Ceramic ZnO Surge Diverters with Silicone Housed manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
Disconnect Switch Operating Mechanism Boxes for Disconnector
Kema Tested Polymeric Silicone ZnO Surge Arresters with Hoop
3kv Silicon Rubber Lightning Arrester with Kema Test Report
High Voltage Electrical Porcelain Surge Arrester with Cap
51kv Ploymer Housed Moa Surge Arrester With Disconnect
Housed Metal Oxide 132kv Porcelain Surge Arrester
Popular Lightning Arrester Products
Yh5w Polymeric Housed Metal-Oxide Lightning Surge Arrester Without Gaps
Cgf Suspension Clamp (carried or hung-down type)
a. C Load Interrupter Air Switchs 30kv 630A Single
Surge Protective Device Lightning Arrester
Low Voltage 12V 12kv Moa Surge Lightning Arrester
11kv Porcelain Surge Arrester/Lighting Arrester
Popular Surge Arrester Products
51kv Outdoor Electric Line Overvoltage Protection Surge Arrester
250kv Substation Type Line Discharge Level 3 Ceramic Lightning Arrester
500kv Outdoor Substation Ceramic Housing Zinc-Oxide Surge Arrester Without Gaps
24kv Polymer ZnO Lightning Arrester
35kv Silicon Type Surge Arrester CMA1.5W-30/80
Popular Surge Arresters Products
3kv-36kv 10ka Polymer Housed Surge Arrester
Silicone Housing Arrester Lightning for Over-Voltage Protection
Polymeric Housed Zinc Oxide Surge Arresters Without Gaps
10ka/ 5ka Gapless Lighting Arrest 21kv Moa Surge Diverter
Rated Voltage 100kv 110kv 120kv Transmission Line Type ZnO Lightning Diverter
Electrical Product 30kv Surge Protective Device
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters