120000kVA 230kv Oil Immersed on Load Tap Changer Power Transformer

Description:

Double Winding Non-excitation Voltage Regulation Transformer: Maximum 420000kVA

Three Winding Non-excitation Voltage Regulation Transformer: Maximum 240000kVA

Double Winding On-load Voltage Regulation Transformer: Maximum 240000kVA

Three Winding On-load Voltage Regulation Transformer: Maximum 240000kVA

Autotransformer: Maximum 360000kVA

Technical parameters:

Name: Three-phase dual winding with stabilization winding on-load voltage regulation oil immersion air-cold

power transformer

Type: SFZ-120000/230

Rated voltage: 230/34 /25kv

Rated capacity: 100000/120000kVA

Rated voltage ratio: 230± 8× 1.25%/34kV

Rated current: 301/2038A

Phase number: Three

Rated frequency: 50 Hz ± 3%

Connection set: Ynyn0(d11)

Voltage regulating method: Neutral point on-load Regulating

Short circuit impedance: 9.5%(100MVA)

Cooling mode: ONAN/ONAF

Winding insulation level:

Lightning impulse withstand voltage (kV\peak value) 1min Main frequency withstand voltage

(kV\RMS)

Full wave Chopped wave

High voltage side: 1050 1175 460

Neutral point of high voltage: (1050) ( 460 )

Low voltage side: 170 185 70

Neutral point of low voltage: 170 70

Insulation Level: A

Field strength between transformer winding turns is no more than 2kV/mm

Transformer loss (under 75)\no-load current and efficiency

No-load Loss: 92 kW According to IEC standard

Load Loss: 356 kW According to IEC standard

No-load current: 0.3 % According to IEC standard

Radio interference and corona

Under the Maximum phase voltage, corona is not visible from outgoing terminal in the night of clear day at

outdoor. Radio interference voltage is no more than 2500UV.

Provide users with 500kV and below, 1000MVA and below series oil immersed power transformers. stay

While digesting the advanced technology at home and abroad, combined with the advanced technology at home and abroad and our company’s experience in producing power transformers for many years, through

Through optimization and innovation, we have successfully produced a series of power transformers with low noise, low loss, low partial discharge and high short-circuit resistance,

Fully comply with and superior to national standards and International Electrotechnical Commission recommended standards

Reference:

1. Low loss and low noise

The core piece adopts the laminated form of full oblique joint, and the oil tank adopts composite shielding technology

Structural parts adopt measures such as reducing eddy current loss to solve the phenomenon of local overheating.

2. Safe and reliable operation

The electrical calculation adopts simulation software for positioning and quantitative analysis to ensure sufficient electrical strength and reliability

Low loss and effective suppression of local overheating;

The local discharge is kept below 50pc, and the temperature rise of transformer winding and oil surface are low

Above 5K of national standard, yield strength of winding conductor ≥ 180n / mm2, copper conductor, transformer

It has strong short-circuit resistance, which can ensure the long-term stable operation of the transformer.

3. Easy installation and maintenance

The transformer adopts core free structure, and all accessories are pre installed in the factory.

The transformer adopts maintenance free structure and technology, and the product maintenance is simple and convenient.

4. Fine workmanship

The coil is wound by vertical winding machine and equipped with tensioning device to ensure the axial direction of all windings

Winding force to improve the mechanical strength of winding.

The combined suit process is adopted to reduce the assembly tolerance of the body and improve the overall quality of the body

strength.

All high voltage electrodes and metal structures are rounded to avoid tip discharge

Our Best Service For You

Order Instructions

When you choose our company product, please offer following data:

Transformer model:                     

Rated capacity:                     kVA

Phase       :    Three-phase

• Single-phase

Frequency   :     50HZ

•  60HZ

Rated voltage ( H.V. / L.V. ):                

Tapping range: ±       ×       %

Insulation level: LI       AC       / LI       AC        kv

Veotor group:  Dyn11

             Yyno

             Other

Short-circuit Impedance:        %

Cooling method:  ONAN

                ONAF

Tapping method:  OLTC

                OCTC

                Other

Other requirement:                                            

Notes:

1. We also can design special products according to customer’s particular requirements.
2. The final dimension is subject to outline drawing.

Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1