15kv 100A-200A Electrical Porcelain Drop-out Fuse Cutout Manufacture
15kv 100A-200A Electrical Porcelain Drop-out Fuse Cutout Manufacture image
Get Latest Price Request a quote
Quick Details
Product Details
Gama 20 kV a 36 kV
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
We are China 15kv 100A-200A Electrical Porcelain Drop-out Fuse Cutout Manufacture manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Cut out Products
Type“ T” Earthwire to Earthwire
Clamp, Suspension; Aluminum Alloy Body and Keeperpiece;
High Voltage Fuse Cut out/Porcelain Cut-out
33kv-36kv Pd2 Series Export Drop-out Electrical Fuse Cutout with Silicone
Popular Fuse Products
High Voltage Dropout Fuse or Fuse Cutout (Vc-15) , Silicon Fuse Cutout, Fuse Cutout
Fuse Mount Prw 12 - 33 Kv Expulsion Fuse
(H) RW15-12f/ (100-200) Export-Oriented Outdoor AC High-Voltage Drop-out Fuse
27kv High Voltage Porcelain Fuse Cutout, Drop out Fuse 24kv 100A/200A
High Voltage Dropout Fuse or Fuse Cutout 24kv, Silicon Fuse Cutout, Fuse Cutout
Popular Interrupter Products
Switch Disconnector Fuse Holder, 36 Kv - 100 AMP, Without Arc Chute
Low Voltage Draw out Switchgear
High -Voltage Fuse Cutout 33kv
American Prefabricated Box Type Substation
Popular jgtrade1 Products
Preformed Guy Grip 7/8 Swg Dead Ends
33kv Porcelan Pin-Type Insulator
Support Type Single Flexible Terminal Connectors for Tubular Bus-Bar Type Msz, Horizontal Type
Tags: Cut out, Fuse, Interrupter, jgtrade1