33kv Expulsion Fuse Element
33kv Expulsion Fuse Element image
Get Latest Price Request a quote
Quick Details
Product Details
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW DTF has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
We are China 33kv Expulsion Fuse Element manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Drop out Fuses Products
Polymer Fuse Cutout, Drop out Fuses 21kv 200A
Polymer Fuse Cutout, Drop out Fuses 27kv 1000A
Polymer Fuse Cutout, Drop out Fuses 21kv 100A
Tubular Bus-Bar Joints Type Mj/W, Outside
Polymer Fuse Cutout, Drop out Fuses33kv 100A
Popular Fuse Cutout Products
24kv High Voltage Breaking Overcurrent Fuse Cutout
Fuse Cutout, Drop out Fuses 27kv 300A 12ka
24kv Outdoor Expulsion Drop-out Type Distribution Fuse Cutout
12ka Outdoor High Voltage Fuse Cutout
11kv High Voltage Porcelain Fuse Cutout, Drop out Fuse
Popular High Voltage Fuse Products
6PCS Brushes Set 3PCS Flat Brushes: 15-25-35mm 3PCS Round Brushes: 20-25-30mm
Polymer Fuse Cutout, Drop out Fuses 33kv 100A
33kv, 36kv, High Voltage Electrical Porcelain Drop-out Fuse Cutout Fuse Insulator
24kv High Voltage Fuse Cutout Arrester Combinations for Overhead Line
Cowhide Split Leather Welding Gloves
Popular jgtrade1 Products
End-Caps for Tubular Bus-Bar Type Mgf
15kv Polymer Line Post Insulators Insulators
J Type Fuse Holder 82mm 92mm Jpu 630A 500A 400A 600V 415V Wedge J Type Fuse
Tags: Drop out Fuses, Fuse Cutout, High Voltage Fuse, jgtrade1