S11/S13-Mrd 6.3/10kv 30-1600kVA Preinstalled Type Intelligent Three-Phase Buried Type Power Transformer

Model Description




Technical parameters 

Product features 

1. s11 The buried transformer can be installed flexibly, and can be directly buried underground. The power supply control equipment occupies less area, and the upper ground can be green and beautify the environment.
2. The capacity is small and the points are densely distributed. In large urban buildings, the first floor has one change or the first floor is changeable. In case of failure of individual equipment, the impact of power outage maintenance is small; In rural power supply, small capacity buried power transformer is directly buried under the pole, with several households having one transformer, reducing line loss and theft accidents, and effectively improving the reliability of power supply.
3. The international advanced manufacturing technology is adopted, and the noise is low even if the machine is operated at full load, which conforms to the environmental protection standards of China. With “environmental protection”, it has built a modern urban block without visual pollution and environmental pollution, beautifying the urban environment. At present, in urban reconstruction and construction, new rural construction and housing development, the power department is required to reduce the area of power supply equipment as much as possible without affecting the landscape effect of urban construction when setting power supply equipment.
4. s11 Buried transformer can replace the original roadside distribution transformer station for power supply in urban scattered power supply. This makes both sides of urban roads clean, beautiful, safe and reliable, reduces power failure accidents caused by rainy and snowy days, and reduces maintenance.

Main functions and descriptions of the product

Main functions and characteristics of S11-M.RD series buried transformers
1. Two way (one in and one out) three-phase plug-in high-voltage cable connector is used for high-voltage incoming line;
2. The low-voltage outgoing line adopts three-phase plug-in low-voltage cable connector.
3. The high-voltage side is equipped with current limiting fuse protection;
4. The tank body is made of stainless steel.
5. The protection level is IP68. All water can be immersed in water for a period of time.
6. The temperature rise limit for operation in the pit shall comply with the provisions of GB1094.2-1996.
Description of S11-M.RD series buried transformer:
1. The cover plate is 4mm steel plate, and the hinge is 10mm round steel.
2. The second is that there are bricks on all sides, and the internal surface is coated with cement mortar.
3. The reinforced concrete shall be used for on-site pouring after surrounding.
4. The shaft clearance size shall ensure that the length of the embedded transformer is+200, the width is+200, and the height is+600mm.

Product details

Products real shot

A corner of the production workshop

Product packaging

Product application case

 
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1