Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

China 
                Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type
              manufacture and supplier

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type image

Get Latest Price Request a quote

Basic Info.

Parts
Not Be Dropped

Bolt Quality
1-3

Features
Light Weight

Transport Package
Paper Box

Specification
120*150*60mm

Trademark
CNKC

Origin
China

Production Capacity
10000 Pices/Monthly

Product Description

Product Description

T-clamp refers to the hardware used to connect the conductor with the branch line to transfer electrical load. High voltage transmission line is an important part of power grid, which connects substations and transmits power. In the design of transmission lines, we can see the connection mode of line T-connection. T-connection lines are two lines with different spatial levels connected by short circuit at the intersection of the same voltage level. Substation A supplies power to substations B and C at the same time. The advantages are that investment is reduced and a substation bay is used less. This way of connecting another line from the main line is vividly called “T” connection mode, This outgoing point is called “T contact”.
T-type clamp is mainly used for overhead circuit lines or substations, which leads down current branches on the main bus in a “T” mode. There are two types: bolt type and compression type. For small section conductors, the so-called T-type connection can also be used with parallel groove clamps or clamped elliptical splicing tubes.
TL series single conductor T-clamp is a kind of T-clamp used to connect branch conductor to the trunk conductor, including: T-shaped substrate, with trunk groove in the transverse part, with wire holes in the longitudinal part, metal linings are set on the inner wall of trunk groove and branch hole, and the two metal linings are connected as a whole, and the upper surface of the longitudinal part of the substrate is threaded with branch conductor compression screws; Trunk slot cover is inserted with trunk slot, and its upper surface is screwed with dry conductor compression screw; The T-shaped upper cover is buckled with the T-shaped base. When connecting, only the simple work of fastening screws is needed, which saves time and labor; The branch wire and the dry wire are in close contact with the metal lining through the compression screw, and the contact area is large, so the connection is safe and reliable.

Technical parameters

Product features and instructions for use

Features:
a. The material of the wire clip is exactly the same as the wrapped material (stranded wire), thus ensuring strong corrosion resistance.
b. The special design of the T-clamp avoids the possibility of loss or damage of bolts, nuts, washers and other components during installation or operation, and has high reliability in operation.
c. The installation quality of the wire clamp is less affected by the human factors of the installation workers, the installation quality is consistent, and the installation process will not damage the wire.
d. The installation of the wire clip is simple and quick, without any tools, and one person can quickly complete the installation with bare hands on site

Instructions for use:
a. Select the appropriate T-connector for the type of follow-up wire. T-connectors of different specifications are irreplaceable.
b. The T-type wire clip is a one-time product, and should not be used repeatedly after bearing full tension.
c. This product is only suitable for installation by trained technicians.
d. Before installing the T-clamp, the wire should be thoroughly ground to remove the oxide layer, and a special conductive grease should be applied to the surface of the wire.
e. This product is a precision device. In order to ensure correct installation, it should be stored in a packaging box to prevent collision or heavy pressure during handling to avoid deformation of the pre-twisted wire.
f. When working in or near live lines, special attention must be paid to prevent electric shock accidents.
g. It is recommended to connect the bus bar and the down conductor to achieve electrical performance through jumper connection, and the T-shaped connecting bar only bears tension.

Product details

Products real shot

 

A corner of the production workshop

 

Product packagingProduct application case

 

 

/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

We are China Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote

Popular Cable Wire Clamp Products

Fdj 16-300mm2 1kv Insulation Protective Grounding Device Power Fitting

Ty 35-630mm² 20-70mm Electric Power Fittings Hydraulic T-Clamp Single Conductor Branch Clamp

Gty 1.5-1000mm2 1.8-44mm Tinned Copper Connecting Tube Cable Lugs

Jbty 10-240mm^2 40*34*45mm Copper Special-Shaped Parallel Groove Clamp Cable Branch Connection Clamp

Kw -2 Insulation Puncture Cable Clamp (connector)

Kw (JJC) Series 1-20kv 0.75-400mm2 Insulated Puncture Type Cable Connector Insulation Puncture Clamp

Popular cnkcele Products

Fzsw 12/252kv Composite Post Insulators for Power Stations Cross Arm Insulator

Ws 18-32mm Socket Clevis Link Fitting Electric Power Fittings

Jgp 45-145mm Three Core High Voltage Cable Clamp Cable Retaining Clip

Rvv 1/1.5/2.5 300/500V 2-5 Core Flame Retardant Insulation Sheathed Soft Copper Core Power Cord

Wsy/Nsy/Jsy 11/35kv 35-500mm2 3 Cores Outdoor and Indoor High Voltage Heat Shrinkable Cable Terminations and Intermediate Joint

Jls-35kv/100V 5-300A 30/50va 10/20va Outdoor Oil-Immersed Combination Transformer High Voltage Power Metering Box

Popular Overhead Conductor Clamp Products

Es/PS Series 1kv 25-95mm² Fixed Suspension Clamp of Overhead Cable

Ttd 1kv 77-679A 1.5-400mm2 Waterproof and Flame-Retardant Insulation Piercing Connector for Street Lamp Distribution System Insulation Puncture Clamp

Jbc 1.5-300mm^2 1-10kv 75-600A Puncture Clamp Insulation Puncture Clip

Jbtl 16-240mm^2 98*50*50mm Aluminum Parallel Trench Wire Clip

Ot 10-1000A 5.2-18.2mm Copper Passing Through Connecting Terminal Cable Lugs

Jkg 4-150mm2 Electric Power Line Aluminum Conductor and Into Household Copper Conductor Transition Connection Wire Clip

Popular Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type Products

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

Tags: , , ,

FAST AND RELIABLE SERVICE FOR YOUR PROJECT

Contact our trained experts today to find your perfect power solution.

ASK A QUESTION