Fdj 16-300mm2 1kv Insulation Protective Grounding Device Power Fitting
Fdj 16-300mm2 1kv Insulation Protective Grounding Device Power Fitting image
Get Latest Price Request a quote
Basic Info.
Product Description
Product Description
The anti-power-down protection device is suitable for low-voltage insulated distribution lines of 1KV and below on both sides of the tie switch, at the joints of branch poles and tension poles, and at the branch line points that may be reversed (or the branch line with a three-phase power meter installed) The grounding protection of the grounding point of the power failure should be set on the wire of the power failure.
Technical parameters and structure dimension
Product features and Installation matters
characteristic:
1. Keep the line in an insulated state and eliminate the hidden danger of electric shock
2. Easy to install, open the button to connect the ground wire directly
3. The combination of wire protection copper foil and insulating tape greatly enhances the anti-oxidation performance of the conductor and improves the life of the cable
4. Double protection, that is to prevent water vapor or air from entering the interface, and ensure the insulation effect when the interface is not in use
5. It can be reused and has the same life as the wire. It is an energy-saving and environmentally friendly product.
6. Stable product performance, maintenance-free, maintenance-free, greatly reducing maintenance costs
Install:
1. Strip the wire insulation about 70-75mm,
2. Wrap tinned copper foil to protect the cable conductors,
3. Wrap 5-8 layers of electrical tape around the ends of the two insulating layers,
4. Cut the length of the waterproof sealing tape according to the installed wire section, wrap both ends,
5. Install the anti-shock insulating protective cover, fasten the buckles one by one,
6. Product installation completion diagram,
Product use environment
1. Altitude: ≤ 1000M
2. Ambient temperature: -25ºC~+50ºC
3. Sunlight intensity: up to 0.1W/cm2 (wind speed: 0.5m/s)
4. Maximum temperature difference: 25K
5. Maximum wind speed: 35m/s
6. Ice thickness: ≤ 10mm
7. Earthquake resistance: ≤ class 8
8. Installation location: outdoor
Product Deatils
Product real shot
corner of the Production workshop
Product packaging
Product application
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
We are China Fdj 16-300mm2 1kv Insulation Protective Grounding Device Power Fitting manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Cable Wire Clamp Products
Dtga (SC) 4-1000mm2 6.2-22.5mm Peephole Copper Connecting Terminal Cable Lugs
Dt 10-1000mm2 8.4-21mm Copper Connecting Wire Terminals Cable Lugs
Mwl 63-125mm Outdoor Supports for Bar (Vertical setting) Substation Fitting
Jbt 16-240mm2 Overhead Cable Branch Wire Clamp Copper Parallel Trench Splicing Fitting
DTG 4-1000mm2 4.2-23mm Tube Pressed Copper Connecting Terminal Tinned Copper Cable Lug
Popular cnkcele Products
Jgpd (H) 45-130mm High Quality Three Core High Voltage Cable Clamp Cable Retaining Clip
Rxwo/RW 35kv 600/2000mva 28ka Outdoor High Voltage Fuses for Power Transmission Lines 0.5-10A
Zn7 1140V 400A Mine Explosion-Proof Low-Voltage AC Vacuum Circuit Breaker
Popular Fdj 16-300mm2 1kv Insulation Protective Grounding Device Power Fitting Products
Popular Overhead Conductor Clamp Products
Jb 16-630mm^2 70-230mm Overhead Cable Parallel Groove Clamp Wire Clamp
PGA 10-300mm^2 34-133mm Energy-Saving Type Parallel Trench Wire Clamps for Overhead Cables
Ca/CS/Es/PS Series 1kv 15-22kn Exit Type Aluminium Alloy Fixing Hook Bracket of Overhead Cable
Tags: Cable Wire Clamp, cnkcele, Fdj 16-300mm2 1kv Insulation Protective Grounding Device Power Fitting, Overhead Conductor Clamp
