Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting

China 
                Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting
              manufacture and supplier

Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting image

Get Latest Price Request a quote

Basic Info.

Model NO.
TL

Usage
Electrical Appliance

Material
Aluminum Alloy

Type
O Type

Defense
Durable and Practical

Install
Quick and Convenient

Transport Package
Material Flow

Specification
11-630mm² 7.5-34.5mm

Trademark
CNKC

Origin
China

Production Capacity
5000pieces/Year

Packaging & Delivery

Package Size
50.00cm * 40.00cm * 30.00cm

Package Gross Weight
20.000kg

Product Description

Product Description

T-clamp refers to the hardware used to connect the conductor with the branch line to transfer electrical load. High voltage transmission line is an important part of power grid, which connects substations and transmits power. In the design of transmission lines, we can see the connection mode of line T-connection. T-connection lines are two lines with different spatial levels connected by short circuit at the intersection of the same voltage level. Substation A supplies power to substations B and C at the same time. The advantages are that investment is reduced and a substation bay is used less. This way of connecting another line from the main line is vividly called “T” connection mode, This outgoing point is called “T contact”.
T-type clamp is mainly used for overhead circuit lines or substations, which leads down current branches on the main bus in a “T” mode. There are two types: bolt type and compression type. For small section conductors, the so-called T-type connection can also be used with parallel groove clamps or clamped elliptical splicing tubes.
TL series single conductor T-clamp is a kind of T-clamp used to connect branch conductor to the trunk conductor, including: T-shaped substrate, with trunk groove in the transverse part, with wire holes in the longitudinal part, metal linings are set on the inner wall of trunk groove and branch hole, and the two metal linings are connected as a whole, and the upper surface of the longitudinal part of the substrate is threaded with branch conductor compression screws; Trunk slot cover is inserted with trunk slot, and its upper surface is screwed with dry conductor compression screw; The T-shaped upper cover is buckled with the T-shaped base. When connecting, only the simple work of fastening screws is needed, which saves time and labor; The branch wire and the dry wire are in close contact with the metal lining through the compression screw, and the contact area is large, so the connection is safe and reliable.

Technical parameters

 

Product features and instructions for use

Features:
a. The material of the wire clip is exactly the same as the wrapped material (stranded wire), thus ensuring strong corrosion resistance.
b. The special design of the T-clamp avoids the possibility of loss or damage of bolts, nuts, washers and other components during installation or operation, and has high reliability in operation.
c. The installation quality of the wire clamp is less affected by the human factors of the installation workers, the installation quality is consistent, and the installation process will not damage the wire.
d. The installation of the wire clip is simple and quick, without any tools, and one person can quickly complete the installation with bare hands on site

Instructions for use:
a. Select the appropriate T-connector for the type of follow-up wire. T-connectors of different specifications are irreplaceable.
b. The T-type wire clip is a one-time product, and should not be used repeatedly after bearing full tension.
c. This product is only suitable for installation by trained technicians.
d. Before installing the T-clamp, the wire should be thoroughly ground to remove the oxide layer, and a special conductive grease should be applied to the surface of the wire.
e. This product is a precision device. In order to ensure correct installation, it should be stored in a packaging box to prevent collision or heavy pressure during handling to avoid deformation of the pre-twisted wire.
f. When working in or near live lines, special attention must be paid to prevent electric shock accidents.
g. It is recommended to connect the bus bar and the down conductor to achieve electrical performance through jumper connection, and the T-shaped connecting bar only bears tension.

Product detail

Products real shot

A corner of the production workshop


Product packaging

Product application case

 

 
/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

We are China Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote

Popular Cable Branch Connector Products

Msg 70-630mm² 14-34mm Supports for Cable Clamp Busbar Fixing Clamp Substation Fitting

Ca/CS/Es/PS Series 1kv 15-22kn Exit Type Aluminium Alloy Fixing Hook Bracket of Overhead Cable

SL 12-48 Cores Power Fittings ADSS/Opgw Optical Fiber Cable Joint Box

Qh 11-16mm Link Fitting Ball Eyes Electric Power Fittings

Xcs 220kv 21-45mm Electric Power Fittings Aluminum Alloy Suspension Clamps for Twin Conductors

Tl 185-630mm² 22-34.5mm The Pressure Plate Type T-Connectors for Single Conductor of Bolt Type

Popular cnkcele Products

Nls/Wls/Jls 26/35kv 1/3 Core Indoor and Outdoor Silicone Rubber Cold Shrink Cable Termination, Intermediate Joint

Yjlv 0.6/1kv 10-400mm² 1-5 Cores High Quality Cross-Linked Aluminum Core Power Cable

Mns 380V 660V 5000A Low-Voltage Withdrawable Switchgear Switch Control Cabinet

Zw32-12D Outdoor Floor-Standing Prepaid Metering Device Vacuum Circuit Breaker

Zw43-12g 12kv 630A Outdoor High Voltage Vacuum Circuit Breaker Switchgear Autoreclose Circuit-Breaker

Byd 35-240mm² 1-10kv Overhead Insulated Power Line Electric-Check Grounding Ring Device

Popular Equipment Clamp Products

Amb (BSMB) 10-800mm² Bolt Type Torque Connector for Conductor and Equipment Connection Power Fitting

Nll 5-46.5mm 40-120kn 10kv Overhead Insulated Conductor Fittings Bolt Type Tension Clamp

Ws 18-32mm Socket Clevis Link Fitting Electric Power Fittings

Klmg 64-136mm Crossing Road Busbar Transition Fittings Substation Fitting

Yk/Upb Series 2.5-10kn Outdoor Overhead Optical Cable Suspension Clamp Bracket & Fixing Hook

Mwl 63-125mm Outdoor Supports for Bar (Vertical setting) Substation Fitting

Popular Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting Products

Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting

Tl 11-630mm² 7.5-34.5mm T-Connectors for Single Conductor of Bolt Type Electric Power Fitting

Tags: , , ,

FAST AND RELIABLE SERVICE FOR YOUR PROJECT

Contact our trained experts today to find your perfect power solution.

ASK A QUESTION