PA Series 1kv 4-120mm² Overhead Cable Fixed Insulation Plastic Tensioning Clamp

PA Series 1kv 4-120mm² Overhead Cable Fixed Insulation Plastic Tensioning Clamp image

Get Latest Price Request a quote

Basic Info.

Model NO.

Parts

Not Be Dropped

Bolt Quality

1-3

Features

Light Weight

Transport Package

Paper Box

Specification

120*150*60mm

Trademark

CNKC

Origin

China

Production Capacity

10000 Pices/Monthly

Product Description

Product Description
At the corners of cables such as optical cables, a kind of power fittings – strain clamps are often seen. The tension clamp is used to fix the wire to bear the tension of the wire, and hang the wire to the metal fitting on the tension string or tower. It is used to fix the wire or lightning conductor on the tension insulator string of the non-linear pole tower, and it acts as an anchor. Spiral aluminum-clad steel wire has extremely strong tensile strength, no concentrated stress, and plays a role in protection and auxiliary vibration reduction for optical cables.
According to the different structures and installation conditions, the tension clamps can be roughly divided into two categories:
the first category: the tension clamps must bear all the tension of the conductor or lightning conductor, and the grip force of the clamp is not less than the rated value of the installed conductor or lightning conductor. Tensile resistance of 90, but not as a conductor. This type of clamp can also be removed after the wire is installed and used separately. Such clamps include bolt-type strain clamps and wedge-type strain clamps.
The second category: tension clamps are used as conductors in addition to bearing all the tension of conductors or lightning conductors. Therefore, once this type of wire clamp is installed, it cannot be disassembled, and it is also called a dead wire clamp. Because it is a conductor, the installation of the clamp must be carefully carried out in accordance with the relevant installation operating procedures

According to the use, the tension clamp can be divided into:
optical cable tension clamp:
small tension wedge tension clamp
for ADSS optical cable, small tension tension clamp
for ADSS optical cable, medium tension and large tension tension clamp for ADSS optical cable
OPGW Tension clamps for optical cables Double tension clamps
for OPGW optical cables
Conductor tension clamps:
1. Pre-twisted conductor tension clamps : Pre-twisted conductor tension clamps for
steel-cored
aluminum stranded wires Stranded wire strain clamps
Pre-twisted wire strain clamps for insulated wires
2. Pre-twisted ground wire tension clamps:
pre-twisted ground wire tension clamps
for steel strands Stranded ground wire tension clamp

Technical parameters

Product features and advantage

Product features

Features of strain clamps:
(1) High strength: each cable clamp has an extra twisted length to ensure that the gripping force can reach more than 100% of the rated breaking force (RBS) of the cable; strong versatility: can Compatible with a variety of hardware. The diameter of the large pull wire clamp and the adjustable pull wire clamp can reach 1.001 inches (25.4mm, that is, the cross-sectional area is 500mm2), which is the best choice to solve the problem of large pull wires in China.
(2) Good corrosion resistance: the material is exactly the same as the pull wire, which can prevent galvanic corrosion between the wire clamp and the pull wire.
(3) Simple installation: All kinds of pull wire clips can be quickly and easily operated on site by hand, without any special tools, and the operation can be completed by one person.
(4) The installation quality is easy to guarantee, and the installation quality of the pull wire clamp is easy to ensure consistency, no special training is required, the naked eye can be inspected, and the appearance is simple and beautiful.
Features of ADSS strain clamps:
(1) The outer twisted wire is directly connected to the tower through connecting fittings such as insert rings to bear the load of the line.
(2) The inner skein protects the ADSS optical cable. The main functions are:
a. Effectively transmit the longitudinal compression force to the tension-bearing unit of the optical cable, aramid fiber, to avoid excessive stress on the outer sheath of the optical cable and damage it.
b. Transmission of axial tension.
c. Increase the contact area with the optical cable, so that the stress distribution is uniform and there is no stress concentration point.
(3) Under the premise of not exceeding the side pressure strength of the ADSS optical cable, it has a greater grip on the optical cable and can withstand greater tension.
(4) The holding force of the ADSS optical cable is not lower than 95% of the ultimate tensile strength (UTS) of the optical cable, which is completely suitable for the erection of the optical cable.

Product Installation precautions

1. When installing tension clamps at high places, the bolts must be fully tightened before loosening the traction rope;
2. When installing tension clamps for wires and lightning conductors (optical cables) at high places, reliable measures must be taken to prevent wires from running out. Measures;
3. The ends of the wires cut on the tower should be lowered with ropes;
4. When installing on the ground, the anchoring of the conductors and lightning protection wires (optical cables) should be reliable, and the anchoring work should be performed by technicians.
5. The safety relief valve of the hydraulic pump shall not be adjusted arbitrarily, and the relief valve shall not be used for unloading.

Product details

Products real shot

A corner of the production workshop

Product packaging

Product application case

/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

We are China PA Series 1kv 4-120mm² Overhead Cable Fixed Insulation Plastic Tensioning Clamp manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote