Al Xhhw-2, Building Wire, 600 V, Al/XLPE (UL44/ICEA S-95-658/NEMA WC70)

APPLICATION:
1. General purpose wiring for lighting and power – residential, commercial, industrial buildings in accordance with National Electrical Code, maximum conductor temperature of 90° C in wet or dry locations, 600 volts, for installation in conduit or other recognized raceways.
2. Suitable for use in low leakage circuits requiring a dielectric constant of 3.5 or less, such as isolated circuits supplying anesthetizing locations per Article 517-160 of the NEC.
3. Suitable for use as low leakage inductive (loop) vehicle detector wire in accordance with state and municipal requirements.

STANDARDS:
1. Listed by UL as Type XHHW-2 per Standard 44 for Rubber-Insulated Wires and Cables.
2. Conforms to ICEA S-95-658/NEMA WC70, utilizing Column B thicknesses.
3. Conforms to Federal Specification J-C-30B.

CONSTRUCTION:
Aluminum conductor, XLP thermosetting chemically crosslinked polyethylene insulation, surface printed.