Waterproof Hot-DIP Galvanized Anti-Thunder Piercing Clamp Connector

Description:
The insulated piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.
When the cable wire need to be branched or connected, firstly,insert the cable branch line terminal into waterproof end cap sleeve, fix the branch of main wire , then using the socket wrench to twist torque nut on the wire clamp , contact blades can pierce through the cable insulation layer in the process, the silicone grease in the shell overflows around the place contacted with the conductor where the seal ring pressure cable is pierced. Once the set point is reached, the torque nut structure would fall down,then the main line and branch line is connected and the waterproof performance and the parameters of the electrical effect reach the standard requirements.

Advantages:
1.Convenient installation,low cost,safe and reliable,maintenance-free.;
2.The joint can be completely insulated and The piercing clamp can be stalled in hot-line work;
3.Resistance to distortion, shock, water, corrosion and aging;
4.The piercing clamp’s comprehensive benefit is obvious and more cost-effective than the traditional connection.
>>——————————————————————

>>——————————————————————