Drop out Fuses 23kv
Drop out Fuses 23kv image
Get Latest Price Request a quote
Quick Details
Product Details
CUT-OUT
Gama 20 kV a 36 kV
TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.
We are China Drop out Fuses 23kv manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Arc Chute Type Products
Fuse Cutout, Drop out Fuses 15kv
Link Operating 11kv Knife Switch
Best Price 12kv 100A Ceramic Types Drop out Fuses Cutout/Cut out Fuse
Intelligent Solid Insulation Cabinet
11kv 12kv High Voltage Polymer Dropout Expulsion Fuse Cutout
Popular Interrupter Products
15kv 100A-200A Electrical Porcelain Drop-out Fuse Cutout
Steel U Channel 2400 X 75X 50 X 4 mm
Arrestor LV Sal I/D Lightining Arrestor
12kv, 24kv & 36kv Fuse Cutouts Porcelain
Popular jgtrade1 Products
35kv Polymer Sation Post Insulators
Hy10W-18, 18kv 10ka Surge Arrester
Series Stram Clamp & Insulation Cover (Wedge Type)
Stay Rod Assembly M16 Conventional
Popular Loadbreak Cutout Products
Outdoor Single Pole Fused Recloser by-Pass Switches 72.5kv
11-15kv-100A (200A) Porcelain Drop-out Fuse Cutout ISO9001
Indoor High Voltage Side Mounted Vacuum Circuit Breaker
High-Voltage Disconnector Switch 36kv
Switch Disconnector Fuse Holder, 36 Kv - 200 AMP, Without Arc Chute
Tags: Arc Chute Type, Interrupter, jgtrade1, Loadbreak Cutout