Guy Clamp

Guy Clamp image

Get Latest Price Request a quote

Quick Details

Product Name:

Guy Clamp

Model NO.:

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

73269090

Product Details

GUY CLAMP

Guy Clamp is used to secure / hold the ends

of the guy strand wires. Clamps are shipped with bolts

assembled, and clamping bolts have oval shoulder

to prevent turning when nuts are tightened.

Heavy duty clamps are drop forged from

basic open hearth carbon steel material with straight

parallel groove.

6	Finish		It should present a smooth surface , free of imperfections and defects
7	Welding		By friction
8	Rules		ANCI C119.4, IEEE 48-1996
9	Quality certificate		ISO 9001
10	Identification mark		The name of the manufacturer and the range of application must be engraved on the terminal
11	Permissible driver 2 AWG	AWG	ACSR, AAC, AAAC, CU
12	Nominal size of the driver	AWG	# 1/0
13	Driver’s diameter what applies	mm	9.14
14	Holes	u	2
15	Identification color		pink
	Dimension
16	Diameter of the hole	inch(mm)	9/16 (14.22)
17	Distance between holes	inch(mm)	1-3 / 4 (44.45)
18	Approximate Length (L)	inch(mm)	4.2 (106)
19	Approximate width (W)	inch(mm)	4/5 (20)
20	Approximate thickness	inch(mm)	0.18 (4.57)
21	Packaging		It should be packed in a box Highly resistant cardboard identified with a label where you describe caliber # 2 AWG, manufacturer, quantity, country of origin

Tension Clamp For Aluminium Conductor
                TECHNICAL SPECIFICATION
1. SCOPE
    This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
     The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2.             STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
                  Overhead Power Lines
BS 729         – Hot dip Galvanised
3.             ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4.             DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5.             SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a.                 50mm² Alu. Conductor
b.                 100 – 150mm² Alu. Conductor
6.             MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7.             INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a.                 A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729