Chain Shackle

Chain Shackle image

Get Latest Price Request a quote

Quick Details

Product Name:

Chain Shackle

Model NO.:

CS-1

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

73269090

Product Details

Anchor and Chain Shackles are Drop forged steel and

supplied with loose Clevis Pin and locked with stainless or hard

brass Cotter Key.

4	Name of the material		5/8 "long straight shackle, 11,300 kg
5	Manufacturing material		Class A steel
6	Manufacturing		The body of the shackle shall be made of one piece steel without welded joints
7	Material pin bolt		The pin must be made of hot galvanized stainless steel ASTM A 153) with its key
8	Finished		They should present a uniform smooth surface in All material, hole and bolt pin, free of burr and defects. Hot dip galvanized according to ASTM A153 standard
9	Standard applied		ASTM C135, ASTM A 153, ASTM A 536
10	Quality certificate		ISO-9001 or recent
11	Certificate of homologation		Attach certificate of DN-DS acceptance
	Dimensions
12	Diameter of the section	inch(mm)	1/2(12.70)
13	Pin center center length to center diameter (B)	inch(mm)	3-1/2 (88.9)
14	Shackle opening	inch(mm)	Specify
15	Pin Bolt Diameter	inch(mm)	5/8 (15.87)
16	Diameter of the head of the shackle (AND)	inch(mm)	Specify
17	Minimum rupture load	kg(lbs)	5,136 (11300)
18	Weight	lbs	0.92
19	Identification mark		Each shackle must present the name or symbol of the manufacturer engraved, breaking load
20	Packaging		It must be packed in cardboard box or highly resistant wood

Tension Clamp For Aluminium Conductor
                  TECHNICAL SPECIFICATION
1.   SCOPE
      This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
       The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2.              STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973    –    Insulator and Conductor fitting for
                    Overhead Power Lines
BS 729          –    Hot dip Galvanised
3.              ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4.              DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5.              SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a.                  50mm² Alu. Conductor
b.                  100 – 150mm² Alu. Conductor
6.              MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7.              INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a.                  A sample of the Tension Clamp complete with all accessories.
b.   A copy of the test report on tests conducted in accordance to BS 3288 and BS 729