Forged Thimble Eye Bolt

Forged Thimble Eye Bolt image

Get Latest Price Request a quote

Quick Details

Product Name:

Forged Thimble Eye Bolt

Model NO.:

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC IEEE

Origin:

China Nanyang

HS Code:

73269090

Product Details

FORGED THIMBLE

EYE BOLT

4	Name of the material		Square head machine bolt 3/8 "x 2"
5	Raw material of manufacture		Steel
6	Finished		The machine bolt and the nut must have Smooth, splinter-free surfaces that can affect their functionality After the galvanizing operation, a centrifugation operation will be carried out to help uniformize the zinc layer in all the threaded parts and eliminate excess zinc. The nut must have been repaired after hot dip galvanizing according to ANSI / ASTM A153.
7	Standard applied		ASTM A153, ASTM A-307, ANSI B18.1.2
8	Quality certificate		ISO-9001 or recent
9	Shape of the head		Round
10	Accessories Bolt		Each bolt must include its square nut
11	Identification mark		Each bolt must present engraved on high or bas-relief on the surface of the head the symbol of the manufacturer and dimension
12	Packaging		The bolts must be packed in a box highly resistant cardboard
	Dimensional characteristics
11	Bolt diameter	inch(mm)	3/8(9.525)
12	Bolt length	inch(mm)	2(50.8)
13	Thread Length	inch(mm)	1-1/2(38.1)
14	Minimum Resistance	kg(lb)	1931(4248)
15	Weight	lbs	0.12

Hot Dip Galvanized

Thimble Eye Bolts are forged from rolled bars

open hearth carbon steel with the same strength of

machine bolt manufactured in accordance with ANSI

standards. C135.1-79.

Eye dimension is the same as shown on page G7 for

Thimble Eye Anchor Rod.

Tension Clamp For Aluminium Conductor
                TECHNICAL SPECIFICATION
1. SCOPE
    This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
     The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2.             STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
                  Overhead Power Lines
BS 729         – Hot dip Galvanised
3.             ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4.             DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5.             SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a.                 50mm² Alu. Conductor
b.                 100 – 150mm² Alu. Conductor
6.             MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7.             INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a.                 A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729