Switch Disconnector Fuse Holder, 27 Kv - 200 AMP, Without Arc Chute

Switch Disconnector Fuse Holder, 27 Kv - 200 AMP, Without Arc Chute image

Get Latest Price Request a quote

Quick Details

Product Name:

Switch Disconnector Fuse Holder, 27 Kv – 200 AMP, Without Arc Chute

Model NO.:

PRW-27P

Standard:

IEC IEEE

Fusing Device:

Fuse Link

Fusing Speed:

T K

Shape:

Circle

Usage:

High Voltage

Type:

Distribution

Breaking Capacity:

High

Trademark:

OEIpower

Transport Package:

Cartons Pallets Wooden Case

Specification:

IEC282-2 IEEEc37-41

Origin:

China

HS Code:

85351000

Product Details

CUT-OUT

Gama 20 kV a 36 kV

– Circuito Principal 200 A

– Ith 8 kA.

– Montaje Vertical

– Tubo Fusible de 100 A

– Norma CEI 282-2

– Tubo Fusible compatible con los

estándar norteamericanos.

– Este modelo permite el montaje

de la Autoválvula directamente

sobre la escuadra de fijación.

– Eslabones fusible:

de 2 Amp. a 100 Amp.

	Short circuit fuse 7.6 / 13.2 kV, 100A, 15KV
	ASTM A 153, ANSI C37-41, ANSI C37-42, ANSI C37-47
	ISO-9000ó recent
	Line
	Distribution
mts	1,500
ºC	40º
	Copper plated and terminals
	Bronze eye type plated
	yes

kA	Porcelain
	Fiberglass
	The outer layer will be composed of bakelized and varnished paper and the inner layer will be composed of absorbent paper impregnated with a special chemical compound that accelerates the extinction of the arc
	It must allow the coupling of the opening device in loads
	It must allow the coupling of the opening device in loads

inch(mm)	16(406.4)
inch(mm)	13.94(354)
inch(mm)	8.0(203.2)
inch(mm)	3 ½(88.9)
inch(mm)	11.63(295.4)
inch(mm)	11- 2/9(285)
Kg	8.6

kV	15
A	100
kV	95
kA
kA	10
mm.	220
kA	35
Hz	60

– Porcelana de color gris, efecto

Antivandálico.

— Montaje sencillo gracias a sus

tornillos de fijación anti-giro.

– No es necesaria ninguna

herramienta para cambiar el

eslabón

La base cortacircuitos en "V" monta aisladores de columna con

armaduras metálicas externas y línea de fuga en función de los niveles

de contaminación I-III-IV asignados.

Su diseño permite el accionamiento por pértiga desde una posición mas

cómoda para la maniobra, al conseguir un ángulo de 45º con respecto a

la base de sujección.

Incorpora un tubo fusible con capacidad para eslabones de hasta 100A

, y es totalmente intercambiable con los modelos de una columna y

modelos de otros fabricantes.

El interior del tubo portafusible está constituido por un recubrimiento

vegetal lo que le confiere un poder de extinción superior a otros

modelos (según fabricante).

El Seccionalizador en "V" monta aisladores de columna con

armaduras metálicas externas y línea de fuga en función de los niveles

de contaminación I-III-IV asignados.

Su diseño permite el accionamiento por pértiga desde una posición mas

cómoda para la maniobra, al conseguir un ángulo de 45º con respecto a

la base de sujección.

Gama:

15 , 24 y 36 kV

12 – 25 – 40 – 63 -100 – 140 A

Número de Defectos: 1 , 2 (Estándar) , 3.

Tiempo de Regeneración : Min. 30s.

Principales Características :

Dispositivo Autoalimentado. Utilización conjunta con Interruptores automáticos.

Importante reducción en los costes derivados de mano de obra y sustitución de fusible de los Cut-Out

convencionales derivados de fallos transitorios, ocasionados por tormentas eléctricas , accidentes

vegetales , etc…

Ausencia de Arcos y desgaste en los contactos.

Reutilización del equipo tras su rearme manual y acoplamiento en su base.

TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless

steel. The fuse cutout type OEI PRW has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn’t allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DICONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.

We are China Switch Disconnector Fuse Holder, 27 Kv - 200 AMP, Without Arc Chute manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.

Get Latest Price Request a quote