Fuyang Metal Oxide Polymer Surge Arrester with Bracket
Fuyang Metal Oxide Polymer Surge Arrester with Bracket image
Get Latest Price Request a quote
Quick Details
Product Details
0.28kV~500kV Surge Arresters’ Characteristics:
1. The Core column applied winding structure, Polymer Housed core pillar molded on the core column, with almost no internal air gap, and outstanding sealing performance Simple in structure, small in size and light in weight.
2. Polymer Housed with silicone rubber, explosion-proof ZnO varistor as the core component is large
in flow capacity.
3. International standard IEC 60099-4 and ANSI 62.22, and with high reliability. With fully insulated tops, the product can be applied to the complete cabinet installation, which can reduce the designing size of cabinet.
4. Products with detachment device can provide signals for quitting operation when failure occurs,
avoiding arrester explosion, and it is maintenance-free.
5. Polymer housed products with a six CTI level, creepage distance meets the requirements of IV level in heavy pollution areas.
Technical Parameters:
| Type | Y10W5-66/176 |
| Rated voltage———kV | 66 |
| MCOV —————-kV | 52.8 |
| Nominal Current——-kA | 10 |
| Residual voltage of steep impulse—-at 5kA(kV) | 221 |
| 8/20µS Residual voltage of lightning impulse current kV(Peak value)—–at 5kA(kV) | 178 |
| Residual voltage of switching impulse current kV (peak value)—-at 1kA (kV) | 137 |
| 1mA D.C reference voltage (kV) | 96 |
| Line discharge level | 1 |
| 2mS long duration impulse current A | 400 |
| 4/10µS High current impulse kA | 100 |
| Lightning impulse withstand kV | 325 |
| Power frequency voltage withstand(dry/wet)kV | 140 |
| 0.1S TOV————–kV | 79.2 |
| 1S TOV—————-kV | 75.9 |
| 10S TOV—————kV | 72.6 |
| 1200S TOV————-kV | 66 |
| Creepage distance —-mm | 2500 |
| Material employed in series non-linear resistor | Zinc Oxide |
Working condition:
| Environment temperature: -40–+40 degree | |||||||
| altitude:<1000m | |||||||
| 48HZ<Rated frequency<62HZ | |||||||
| Power frequency voltage should not be more than continuous running voltage | |||||||
| Max wind speed should be less than 35m/s | |||||||
| Earthquake intensity should be less than 7 degree | |||||||
| If used in contamination area, should be noted in advance. |
Line discharge level from 1 to 5,
We are China Fuyang Metal Oxide Polymer Surge Arrester with Bracket manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular hzyddq Products
Composite Insulator High Voltage Pin Insulator
Fuyang High Power 3movs Metal Oxide Varistor Manufacturers
Fuyang Electrical Silicon Rubber Ceramic Arrester with External Gap
Kema Tested 12kv-24kv Polymeric Lightning Arrester in Hangzhou Fuyang
Medium Voltage 3-36kv Silicone Mcov 17kv Lightning Diverter with Disconnector
10ka Power Station Type Ceramic ZnO Surge Diverters with Silicone Housed
Popular Lightning Arrester Products
Piercing Type Outer Gap Arrester
Electrical Porcelain 33kv Lightning Arrester Surge Arrester High Voltage
High Voltage Power Transmission Surge Arrester
Popular Surge Arrester Products
Substation 33kv Types of Lightning Arrester with Disconnector
High Voltage Polymer Ceramic Porcelain ZnO Surge Arrester 120kv
Distribution Power Networks Electrical Product 36kv Surge Protective Device
Silicon Rubber Lightning Arresrer for High Voltage
60kv High Voltage Electrical Surge Arrester for Transmission Line
Popular Surge Arresters Products
D31 Metal Oxide Varistor for Surge Arrester
30kv/10ka Metal-Oxide Polymeric Surge Arrester
Kema Tested Electrical Equipments Rated Voltage 102kv Polymeric Surge Diverters
Medium Voltage 3-36kv Silicone Mcov 17kv Lightning Diverter with Disconnector
Polymeric Housed Zinc Oxide Lightning Arresters Without Gaps
Outdoor Rated Voltage 12-36kv porcelain Polymer Lightning Protecting Arrester
Tags: hzyddq, Lightning Arrester, Surge Arrester, Surge Arresters
