Preformed Guy Grips/Dead End Tension Clamps/Heliformed Clamps/Galvanized Steel Strand for ACSR Cable

Product Details
GUY-GRIP Dead-ends are intended for use on single wood poles associated with distribution construction.
GUY-GRIP Dead-ends were not designed or tested for use on overhead shield wires and not intended for that application.
Refer to Big-Grip Dead-end, an alternate product recommended for guying transmission construction, or tower and antenna applications.
Refer to the Installation Tools section for the PLP® Pulling Eye, designed to assist application at the anchor.

Preformed guy grips/Dead end tension clamps/heliformed clamps/galvanized steel strand for ADSR cable

Cross-over Marks: 
(A) – Indicate starting point for application on smaller diameter fittings described on the reverse side of this page.
(B) – Indicates alternate starting point for application on larger diameter fittings described on the reverse side of this page.
Cabled Loop: Furnished as standard, all sizes.

Pitch Length: One complete wrap.
Color Code and Length: Assist in identification of strand size, corresponding to tabular information appearing on catalog pages.
Identification Tape: Shows catalog number, nominal sizes.

Short Leg-Long Leg: Identifies rods belonging to each leg,
Product Parameters