High Tension Fiber Cable Anchor Clamp Dead End Clamp

Product Description
Tension clamp, Anchor clamp, Dead end clamp
Dead end clamps for aerial bundled cable

Specifications
Insulated anchoring clamp
1. Type: PA15002. Material: Nylon plus fiber glass
3. Standard: NFC33-042

Introduction
The anchoring clamp is suitable for insulated low-voltage ABC cable. It is also suitable for multiple conductors. It has easy installation and perfect insulated function. It is in accordance with the NFC 33-042.

Material: Nylon plus fiber glass

One Core Anchor clamps are design to anchor self supporting LV. ABC from 2 to 4 cores, the wedge
Can be self-adjusting.

Four Core Anchor clamps are design to anchor self supporting LV. ABC from 2 to 4 cores, the wedge
Can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self
Opening is featured by an integrate sping facilities for easily insert the conductor into the clamp.

Anchoring clamps and their range is designed to cover most common overhead cable sizes. The body
Of a clamp is made fromGlass fiber reinforced polyamid and on the outer side are installed steel sheets

Only or steel sheets and aluminum alloy coverd and making it easy to install the clamp to any kind of anchoring point.

PA 25 6-25sqmm
PA 1500 50-120sqmm
PA2000 120-150sqmm