Flexible Clamps for Tubular Bus-Bar Type Mgs, Group B
Flexible Clamps for Tubular Bus-Bar Type Mgs, Group B image
Get Latest Price Request a quote
Quick Details
Product Details
TECHNICAL SPECIFICATION
1. SCOPE
This specification covers the design and construction of Tension of Tension Clamps to be used for the termination of aluminium-conductors at terminal poles and section poles.
The Clamps are suitable for used in Tropical zone, with a maximum ambient temperature of approximately 40ºC and a mean annual temperature of approximately 28ºC with high humidity and heavy rainfall.
2. STANDARD
this specification is make reference to and comply with the requirements of following standard:
BS 3288:1973 – Insulator and Conductor fitting for
Overhead Power Lines
BS 729 – Hot dip Galvanised
3. ELECTRICAL SYSTEM
The Clamps will be designed for use on a 3 phase,3 wires, 33/22/11/6.6kv,50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor.
4. DESIGN AND CONSTRUCTION
The Clamps are manufactured from material which is not cause chemical corrosion when in constant contact with aluminium conductor. They are have a tensile strength that the breaking strength that are not less than the breaking strength of the conductors to be connected.
The Clamps are properly designed such that will not cause any unnecessary strain and abrasion on the surface of conductors.
5. SIZE OF CLAMPS
The Clamps aredesigned to accommodate the following sizes of Aluminium conductors:
a. 50mm2 Alu. Conductor
b. 100 – 150mm2 Alu. Conductor
6. MARKINGS
The Tension Clamps will be indelibly marked as Customer Requirment.
7. INSPECTION AND TESTS
For evaluation purposes, we will supply the following items to our cusotmer
a. A sample of the Tension Clamp complete with all accessories.
b. A copy of the test report on tests conducted in accordance to BS 3288 and BS 729
Recommended for You
Not exactly what you want?
Post Sourcing Request
Hot Searches
Power Line
Electrical Hardware
Network Hardware
Power Assembly
Power Pole
We are China Flexible Clamps for Tubular Bus-Bar Type Mgs, Group B manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.
Get Latest Price Request a quote
Popular Aluminium Conductor Products
AAC Aluminium Conductor ASTM B231 Iris Pappy Aster Oxlip
ACSR Parakeet (Al 24/7 St) 556.5 Mcm ACSR Conductor
Copper Aluminium Parallel Groove Connector/Bimetal Pg Clamp
BS/ASTM Standard All Aluminum Alloy Conductor AAAC with Grease
Power Transmission Line Overhead Aerial Stranded Aluminium Conductor
Factory Hot Sales Aluminum Armored Cable Aluminium Conductor 4 Core
Popular jgtrade1 Products
High -Voltage Isolate Switch 24kv 1250A
Clearance Price High Voltage 25kv/33kv Porcelain Pin Post Insulator
Terminal, Aluminium Compression-Cableto Flat-4 Hole: Ccls 684c
Gang Operated Air Break Switches 33
Popular Pole Line Hardware Products
Pole Clamp Adapter HDG Pole Line Hardware
160kn Galvanized Forged Steel Ball End Hooks for Pole Line Hardware
Vic Power Fittings Cable Hot Line Clamp Bali Clamp
Hot Selling Pole Line Hardware Down Lead Clamp
Popular Tension Clamp Products
Typical Distribution Mv Load Break Fuse Cutout with Arc Chute
Aluminum Tension Clamp Wedge Type
High Quality Tension Clamp Dean End Guy Grip
Aluminium Alloy Strain Clamp Nll-4
Aluminium Alloy Strain Clamp Nll-5
Tags: Aluminium Conductor, jgtrade1, Pole Line Hardware, Tension Clamp