Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways. The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.
Technical Data
European
XLPE-insulated power cables to DIN VDE 0276 part 620, HD 620 S1 and IEC 60502
Temperature Range During installation up to -5°C/+23°F
Operating Temperature Max. +90°C/+194°F
Short Circuit Temperature +250°C/+482°F (Short circuit duration up to 5 sec.)
Test Voltages for 6/10 kV = 15 kV 12/20 kV = 30 kV 18/30 kV = 45 kV
Minimum Bending Radius During installation max. 15x cable Ø
Power Ratings Table See Technical Information
Code-Designation for Power Cables with PVC or XLPE Insulation
Design
Identification of Design
Explanations
Conductor
N
According to VDE Standard (No abbreviation for copper conductor)
A
Aluminum conductors
Y
Insulation of thermoplastic Polyvinyl chloride (PVC)
2X
Insulation cross-linked Polyethylene (XLPE)
Concentric Conductor, Shielding
C
Concentric conductors of copper wires and copper tape, helically wounded
CW
Concentric conductors of copper wires in wave conal formation and and copper tape, helically wounded
CE
Concentric conductors of copper wires and copper tape over each individual conductor, helically wounded
Shielding
S
Shielding of copper wires and copper tape, helically wounded
SE
Shielding of copper wires and copper tape over each individual conductor, helically wounded
(F)
Longitudinally water-proof shielding
Armor
B
Armor of steel tape
F
Armor of galvanized flat steel wires
G
Counter helix of galvanized steel tape
Jacket
K
Lead jacket
Outer Jacket
Y
PVC jacket
2Y
PE jacket
Cable for U0/U 0.6/1 kV are additionally designated with
-J
Cables with green-yellow (green-natural) conductor are marked with protective conductor
-O
Cables without green-yellow (green-natural) conductor are marked without protective conductor
Cable Construction
Circular bare aluminum-conductor of stranded wires to HD 383
Inner semi-conducting coating
Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1
Outer extrusion of semi-conducting coating spliced with the insulation
Wrapping of conductive material
Shield: Braiding of copper wires with one or two tapes applied helically
Wrapping
PVC outer jacket, compound DMV6 to HD 620.1
Jacket color: Red
Nominal Voltage
6/10 kV
12/20 kV
18/30 kV
Description & No. Conductors x cross-sec. mm2, Nominal Voltage
Operation Voltage max.
Insul. Thick-ness mm
Jacket Thick-ness mm
Outer Dia. min.-max.
Copper Weight kg/km
Alu weight kg/km
Weight ca. kg/km
AWG
NA2XSY 6/10kV 1X50 rm/16
12
3.4
2.5
24.0 – 29.0
182.0
145.0
780.0
1
NA2XSY 6/10kV 1X70 rm/16
12
3.4
2.5
26.0 – 31.0
182.0
203.0
875.0
2/0
NA2XSY 6/10kV 1X95 rm/16
12
3.4
2.5
27.0 – 32.0
182.0
276.0
990.0
3/0
NA2XSY 6/10kV 1X120 rm/16
12
3.4
2.5
29.0 – 34.0
182.0
348.0
1110.0
4/0
NA2XSY 6/10kV 1X150 rm/16
12
3.4
2.5
30.0 – 35.0
182.0
435.0
1240.0
300 kcmil
NA2XSY 6/10kV 1X150 rm/25
12
3.4
2.5
30.0 – 35.0
283.0
435.0
1310.0
300 kcmil
NA2XSY 6/10kV 1X185 rm/25
12
3.4
2.5
32.0 – 37.0
283.0
537.0
1460.0
350 kcmil
NA2XSY 6/10kV 1X185 rm/16
12
3.4
2.5
32.0 – 37.0
182.0
537.0
1405.0
350 kcmil
NA2XSY 6/10kV 1X240 rm/25
12
3.4
2.5
34.0 – 39.0
283.0
696.0
1660.0
500 kcmil
NA2XSY 6/10kV 1X240 rm/16
12
3.4
2.5
34.0 – 39.0
182.0
696.0
1615.0
500 kcmil
NA2XSY 6/10kV 1X300 rm/25
12
3.4
2.5
36.0 – 41.0
283.0
870.0
1910.0
600 kcmil
NA2XSY 6/10kV 1X400 rm/35
12
3.4
2.5
40.0 – 45.0
394.0
1160.0
2315.0
750 kcmil
NA2XSY 6/10kV 1X500 rm/35
12
3.4
2.5
43.0 – 48.0
394.0
1450.0
2750.0
1000 kcmil
NA2XSY 12/20kV 1X50 rm/16
24
5.5
2.5
28.0 – 33.0
182.0
145.0
950.0
1
NA2XSY 12/20kV 1X70 rm/16
24
5.5
2.5
30.0 – 35.0
182.0
203.0
1110.0
2/0
NA2XSY 12/20kV 1X95 rm/16
24
5.5
2.5
31.0 – 36.0
182.0
276.0
1220.0
3/0
NA2XSY 12/20kV 1X120 rm/16
24
5.5
2.5
33.0 – 38.0
182.0
348.0
1310.0
4/0
NA2XSY 12/20kV 1X150 rm/16
24
5.5
2.5
34.0 – 39.0
182.0
435.0
1460.0
300 kcmil
NA2XSY 12/20kV 1X150 rm/25
24
5.5
2.5
34.0 – 39.0
283.0
435.0
1520.0
300 kcmil
NA2XSY 12/20kV 1X185 rm/16
24
5.5
2.5
36.0 – 41.0
182.0
537.0
1660.0
350 kcmil
NA2XSY 12/20kV 1X185 rm/25
24
5.5
2.5
36.0 – 41.0
283.0
537.0
1720.0
350 kcmil
NA2XSY 12/20kV 1X240 rm/25
24
5.5
2.5
39.0 – 44.0
283.0
696.0
1910.0
500 kcmil
NA2XSY 12/20kV 1X240 rm/16
24
5.5
2.5
39.0 – 44.0
182.0
696.0
1860.0
500 kcmil
NA2XSY 12/20kV 1X300 rm/25
24
5.5
2.5
41.0 – 46.0
283.0
870.0
2220.0
600 kcmil
NA2XSY 12/20kV 1X400 rm/35
24
5.5
2.5
44.0 – 49.0
394.0
1160.0
2620.0
750 kcmil
NA2XSY 12/20kV 1X500 rm/35
24
5.5
2.5
47.0 – 52.0
394.0
1450.0
3030.0
1000 kcmil
Description & No. Conductors x cross-sec. mm2, Nominal Voltage
Operation Voltage max.
Insul. Thick-ness mm
Jacket Thick-ness mm
Outer Dia. min.-max.
Copper Weight kg/km
Alu weight kg/km
Weight ca. kg/km
AWG
NA2XSY 18/30kV 1X50 rm/16
36
8.0
2.5
33.0 – 38.0
182.0
145.0
1260.0
1
NA2XSY 18/30kV 1X70 rm/16
36
8.0
2.5
35.0 – 40.0
182.0
203.0
1360.0
2/0
NA2XSY 18/30kV 1X95 rm/16
36
8.0
2.5
36.0 – 41.0
182.0
276.0
1510.0
3/0
NA2XSY 18/30kV 1X120 rm/16
36
8.0
2.5
38.0 – 43.0
182.0
348.0
1610.0
4/0
NA2XSY 18/30kV 1X150 rm/25
36
8.0
2.5
39.0 – 44.0
283.0
435.0
1810.0
300 kcmil
NA2XSY 18/30kV 1X150 rm/16
36
8.0
2.5
39.0 – 44.0
182.0
435.0
1760.0
300 kcmil
NA2XSY 18/30kV 1X185 rm/16
36
8.0
2.5
41.0 – 46.0
182.0
537.0
1960.0
350 kcmil
NA2XSY 18/30kV 1X185 rm/25
36
8.0
2.5
41.0 – 46.0
283.0
537.0
2020.0
350 kcmil
NA2XSY 18/30kV 1X240 rm/25
36
8.0
2.5
43.0 – 48.0
283.0
696.0
2260.0
500 kcmil
NA2XSY 18/30kV 1X240 rm/16
36
8.0
2.5
43.0 – 48.0
182.0
696.0
2210.0
500 kcmil
NA2XSY 18/30kV 1X300 rm/25
36
8.0
2.5
46.0 – 51.0
283.0
870.0
2560.0
600 kcmil
NA2XSY 18/30kV 1X400 rm/35
36
8.0
2.5
49.0 – 54.0
394.0
1160.0
2960.0
750 kcmil
NA2XSY 18/30kV 1X500 rm/35
36
8.0
2.6
52.0 – 57.0
394.0
1450.0
3460.0
1000 kcmil
Packaging&Delivery.
Packaging Details:Wooden drums,steel wooden drums or as your requirement Delivery Time:Normally within 30 days(detailly depend on the order quantity)
Contact us Looking forward to cooperation with you.If you have any question or need our certification and sample.Pls contact me freely.You can talk with me by Email or chat software.
We are China
N2xs (FL) 2y 1X500/50 20 Kv Meidum Voltage Cable for
manufacture and supplier,You can get more details with Email,you will get cheap price or factory price.